Disclaimer
How to change rear anti roll bar bushes on VW Sharan 1 – replacement guide
downloads:
8
Views:
66
Important!
This replacement procedure can be used for:
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6 Syncro, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6 Syncro, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
How to change rear Stabilizer bushes on VW SHARAN 7M TUTORIAL | AUTODOC
All the parts you need to replace – Anti Roll Bar Bushes for SHARAN (7M8, 7M9, 7M6) and other VW models
Alternative products
Anti roll bar bush
Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Ratchet wrench
Torque wrench
Flat Screwdriver
Water pump pliers
Hydraulic transmission jack
Replacement: anti roll bar bushes – VW Sharan 1. Tip from AUTODOC:
- Both stabilizer bushes should be replaced simultaneously.
- The replacement procedure is identical for the right and left stabilizer bushes.
- All work should be done with the engine stopped.
Replacement: anti roll bar bushes – VW Sharan 1. Recommended sequence of steps:
- Step 1
Lift the car using a jack or place it over an inspection pit. - Step 2
Clean the fasteners of the stabilizer bush brackets. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fasteners of the stabilizer bush brackets. Use a drive socket #13. Use a ratchet wrench. - Step 4
Remove the stabilizer bush brackets. Use a flat screwdriver. - Step 5
Secure the rear axle beam. Use a hydraulic transmission jack. - Step 6
Remove the stabilizer bushes. Use a flat screwdriver. Use water pump pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Sharan I (7M8, 7M9, 7M6) model
Popular maintenance tutorials for VW Sharan 1
Free download PDF
2.7 MB
Free download PDF3.99 MB
Free download PDF1.94 MB
Free download PDF1.44 MB
Free download PDF1.32 MB
Free download PDF3.27 MB
Complete guides for changing the Stabilizer bushes on different VW SHARAN models
Free download PDF593.92 KB
Free download PDF2 MB
Free download PDF1.64 MB
Free download PDF1.62 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW SHARAN (7M8, 7M9, 7M6)
View more
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
How to inspect and troubleshoot your car heater when it’s not working
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
How to repair a bumper yourself | AUTODOC tips
Most commonly replaced car parts on VW SHARAN
Time to replace parts? Get even better deals in our Shop app.
SCAN ME