Important!
This replacement procedure can be used for:
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6, VW SHARAN (7M8, 7M9, 7M6) 2.8 VR6 Syncro, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V, VW SHARAN (7M8, 7M9, 7M6) 2.8 V6 24V 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on VW SHARAN 1 [TUTORIAL AUTODOC]

video
All the parts you need to replace – Anti Roll Bar Links for SHARAN (7M8, 7M9, 7M6) and other VW models
Alternative products
How to change Anti-roll bar link on VW Sharan 1 1.9 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – VW Sharan 1. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 17
Drive socket # 19
Wheel impact socket #19
Ratchet wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on VW Sharan 1 in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – VW Sharan 1 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on VW Sharan 1 1995 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    How to replace VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 1996 Anti Roll Bar Links - step-by-step manuals and video guides
    Raise the car.
    Replacement: anti roll bar links – VW Sharan 1. Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
  3. Step 4
    VW Sharan 1 2.0 TDI 1997 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW Sharan 1
  4. Step 5
    Changing Anti Roll Bar Links on VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion 1998 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW SHARAN 2.0 1999 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on VW SHARAN (7M8, 7M9, 7M6) 2000: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #19. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on VW Sharan 1 2.8 V6 24V 2001 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use a drive socket #19. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on VW SHARAN 2002? This free workshop manual will help you to do it yourself
    Remove the stabiliser link.
    AUTODOC recommends:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on VW Sharan 1 2003 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    VW SHARAN 2.0 TDI Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new stabiliser link and tighten the fasteners.
  11. Step 12
    Replacing Anti Roll Bar Links on VW Sharan 1 2005 1.9 TDI by yourself
    Screw in the sway bar link fasteners. Use a combination spanner #16. Use a drive socket #19. Use a ratchet wrench.
  12. Step 13
    SHARAN (7M8, 7M9, 7M6) 2.0 2006 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 100 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Sharan I (7M8, 7M9, 7M6) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW SHARAN (7M8, 7M9, 7M6) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW SHARAN (7M8, 7M9, 7M6)
View more
  • How to change Drop links on VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V - replacement tricks
    Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
  • Changing Stabilizer link VW Sharan 1 1.9 TDI - Replacement Tips
    K2 ROTON wheel cleaner overview
  • Maintenance Hacks - VW SHARAN (7M8, 7M9, 7M6) 2.0 TDI Sway bar link replacement guide
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
  • Replace Drop link on VW Sharan 1 - free video tips
    How to remove scratches from car plastic | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW SHARAN (7M8, 7M9, 7M6) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME