
Disclaimer
How to change spark plugs on TOYOTA Wish MPV (_E1_) – replacement guide
downloads:
10
Views:
150

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
TOYOTA Wish MPV (_E1_) 2.0 VVTi (ANE10G, ANE11W) … View more
The steps may slightly vary depending on the car design.
TOYOTA Wish MPV (_E1_) 2.0 VVTi (ANE10G, ANE11W) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Wish MPV (_E1_) and other TOYOTA models
Spark plug
Alternative products

WD-40 spray
High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 14
Spark plug socket # 16
Ratchet wrench
Torque wrench
Clip removal tool
Fender cover
Replacement: spark plugs – TOYOTA Wish MPV (_E1_). Tip from AUTODOC experts:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA Wish MPV (_E1_). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the fasteners of the windscreen wiper arms. Use a drive socket #14. Use a ratchet wrench.
- Step 4Remove the wiper arms.
- Step 5Remove the wiper arm covers. Use a clip removal tool.
- Step 6Treat the fasteners of the windscreen wiper linkage. Use WD-40 spray.
- Step 7Detach the windscreen wiper connector.
- Step 8Unscrew the fasteners of the windscreen wiper linkage panel. Use a drive socket #10. Use a ratchet wrench.
- Step 9Unscrew the fasteners of the fuse box. Use a drive socket #10. Use a ratchet wrench.
- Step 10Remove the panel assembled with the windscreen wiper linkage.
- Step 11Clean the ignition coils.
- Step 12Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
- Step 13Take out the ignition coils from the spark plug wells.Replacement: spark plugs – TOYOTA Wish MPV (_E1_). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting.
- Step 14Clean dirt, dust and debris from inside the spark plug wells.
- Step 15Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 16Take out the spark plugs.
- Step 17Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 18Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 19Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 18 nm torque.Replacement: spark plugs – TOYOTA Wish MPV (_E1_). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Wish MPV (_E1_) model
Popular maintenance tutorials for TOYOTA Wish MPV (_E1_)
Complete guides for changing the Engine spark plug on different TOYOTA WISH models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Wish MPV (_E1_)
View more
- Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- DIY alternator repair | AUTODOC tips
- 5 more brake repair mistakes | Stop making these brake repair mistakes
Most commonly replaced car parts on TOYOTA WISH
Time to replace parts? Get even better deals in our Shop app.

SCAN ME