Important!
This replacement procedure can be used for:
FORD FOCUS Saloon (DFW) 1.4 16V, FORD FOCUS Saloon (DFW) 1.6 16V, FORD FOCUS Saloon (DFW) 1.8 16V, FORD FOCUS Saloon (DFW) 2.0 16V, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for FOCUS Saloon (DFW) and other FORD models
Alternative products
How to change Wheel bearing kit on Ford Focus mk1 Saloon 1.6 16V – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – FORD FOCUS Saloon (DFW). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 30
Wheel impact socket #19
Torque wrench
Hammer
Flat Screwdriver
Bush and bearing driver set
Circlip pliers
Wheel chock
Replacement: wheel bearing – FORD FOCUS Saloon (DFW). Tip from AUTODOC:
  • Do not re-use the bearing assembly of your FORD FOCUS Saloon (DFW) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – FORD FOCUS Saloon (DFW). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Ford Focus mk1 Saloon 1999 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD FOCUS Saloon (DFW) 1.6 16V 2000 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Ford Focus mk1 Saloon 1.8 Turbo DI / TDDi 2001 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FORD FOCUS Saloon (DFW)
  4. Step 5
    Changing Wheel Bearing on FORD FOCUS Saloon (DFW) 1.8 TDCi 2002 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove FORD FOCUS 2.0 16V 2003 Wheel Bearing - online easy-to-follow instructions
    Remove the hub bearing protection cap. Use a flat screwdriver. Use a hammer.
    Replacement: wheel bearing – FORD FOCUS Saloon (DFW). AUTODOC recommends:
    Some cars are not equipped with wheel hub caps.
  6. Step 8
    How to replace Wheel Bearing on FORD FOCUS Saloon (DFW) 2004: download PDF manuals and video instructions
    Clean the fasteners of the wheel hub bearing. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Ford Focus mk1 Saloon 2.0 2005 - download illustrated guide
    Unscrew the hub bearing mounting. Use a drive socket #30.
  8. Step 10
    Need to know how to renew Wheel Bearing on FORD FOCUS 2006? This free workshop manual will help you to do it yourself
    Remove the brake drum.
    Replacement: wheel bearing – FORD FOCUS Saloon (DFW). Professionals recommend:
    Examine the brake drum. Replace it if necessary.
  9. Step 11
    Changing of Wheel Bearing on Ford Focus mk1 Saloon 2007 won't be an issue if you follow this illustrated step-by-step guide
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  10. Step 12
    FORD FOCUS 1.8 Turbo DI / TDDi Wheel Bearing replacement: online guides and video tutorials
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  11. Step 13
    Clean the hub bearing mounting seat. Use WD-40 spray.
    Step 14
    Replacing Wheel Bearing on Ford Focus mk1 Saloon 2000 1.6 16V by yourself
    Press a new bearing into the wheel hub. Use a bush and bearing driver set. Use a hammer.
    AUTODOC recommends:
    Replacement: wheel bearing – FORD FOCUS Saloon (DFW). Do not use excessive force during installation. This may damage the part.
  12. Step 15
    FOCUS Saloon (DFW) 2.0 16V 2001 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk1 Saloon (DNW) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD FOCUS Saloon (DFW) Wheel Bearing replacement - online guide
Tips & tricks for your FORD FOCUS Saloon (DFW)
View more
  • How to change Wheel bearings on FORD FOCUS Saloon (DFW) 1.8 16V - replacement tricks
    How to prevent car windows from fogging up | AUTODOC tips
  • Changing Hub bearing Ford Focus mk1 Saloon 1.6 16V - Replacement Tips
    The Ultimate Guide to Engine Bay Cleaning | AUTODOC
  • Maintenance Hacks - FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi Wheel bearing kit replacement guide
    5 causes of turbocharger failure and how to avoid them
  • Replace Wheel hub bearing on Ford Focus mk1 Saloon - free video tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD FOCUS Saloon (DFW) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME