Disclaimer
How to change front anti roll bar links on FORD FOCUS Saloon (DFW) – replacement guide
downloads:
4
Views:
47
Important!
This replacement procedure can be used for:
FORD FOCUS Saloon (DFW) 1.4 16V, FORD FOCUS Saloon (DFW) 1.6 16V, FORD FOCUS Saloon (DFW) 1.8 16V, FORD FOCUS Saloon (DFW) 2.0 16V, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi … View more
The steps may slightly vary depending on the car design.
FORD FOCUS Saloon (DFW) 1.4 16V, FORD FOCUS Saloon (DFW) 1.6 16V, FORD FOCUS Saloon (DFW) 1.8 16V, FORD FOCUS Saloon (DFW) 2.0 16V, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for FOCUS Saloon (DFW) and other FORD models
Alternative products
Anti-roll bar link
Rod / Strut, wheel suspension
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #15
Combination spanner #17
Drive socket # 15
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – FORD FOCUS Saloon (DFW). AUTODOC recommends:
- Replace the stabiliser links on FORD FOCUS Saloon (DFW) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – FORD FOCUS Saloon (DFW) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD FOCUS Saloon (DFW) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #15. Use a drive socket #15. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk1 Saloon (DNW) model
Popular maintenance tutorials for Ford Focus mk1 Saloon
Free download PDF
1.3 MB
Free download PDF2.69 MB
Free download PDF1.48 MB
Free download PDF1.56 MB
Free download PDF1.66 MB
Free download PDF2.04 MB
Complete guides for changing the Drop links on different FORD FOCUS models
Free download PDF2.02 MB
Free download PDF1.27 MB
Free download PDF2.02 MB
Free download PDF2.02 MB
Free download PDF1.29 MB
Free download PDF2.01 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FOCUS Saloon (DFW)
View more
How to Fix P0401 ✅ error code Insufficient EGR flow
Top 5 reasons why the suspension knocks | AUTODOC tips
How to choose the right engine oil for your car | AUTODOC
How to align the timing marks correctly on an EA888 engine
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.
SCAN ME