Disclaimer
How to change rear suspension lower control arm on FORD FOCUS Saloon (DFW) – replacement guide
downloads:
4
Views:
30
Important!
This replacement procedure can be used for:
FORD FOCUS Saloon (DFW) 1.4 16V, FORD FOCUS Saloon (DFW) 1.6 16V, FORD FOCUS Saloon (DFW) 1.8 16V, FORD FOCUS Saloon (DFW) 2.0 16V, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi … View more
The steps may slightly vary depending on the car design.
FORD FOCUS Saloon (DFW) 1.4 16V, FORD FOCUS Saloon (DFW) 1.6 16V, FORD FOCUS Saloon (DFW) 1.8 16V, FORD FOCUS Saloon (DFW) 2.0 16V, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 TDCi, FORD FOCUS Saloon (DFW) 1.8 Turbo DI / TDDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for FOCUS Saloon (DFW) and other FORD models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower control arm – FORD FOCUS Saloon (DFW). Professionals recommend:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: rear suspension lower control arm – FORD FOCUS Saloon (DFW). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. FORD FOCUS Saloon (DFW)Step 5
Remove the wheel. - Step 6
Support the arm. Use a hydraulic transmission jack. - Step 7
Clean the control arm fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the arm fastening to the beam. Use a drive socket #15. Use a ratchet wrench. Use a tap wrench. Remove the fastening bolt. - Step 9
Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #15. Use a ratchet wrench. Remove the fastening bolt. - Step 10Remove the arm.Step 11
Install a new suspension arm. - Step 12
Install the control arm fasteners. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk1 Saloon (DNW) model
Popular maintenance tutorials for Ford Focus mk1 Saloon
Complete guides for changing the Control arm on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FOCUS Saloon (DFW)
View more
7 signs of faulty fuel injectors | AUTODOC tips
Deep interior cleaning | Car transformation by detailing
When, why, and how to change engine oil | AUTODOC tips
DIY brake caliper restoration | AUTODOC tips
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























