Replacement: anti roll bar links – Ford Transit Mk7 van. AUTODOC recommends:
Replace the anti-roll bar links and bushes in pairs.
The replacement procedure is identical for the anti-roll bar links and bushes on both sides of the same axle.
All the work should be carried out with the ignition switched off.
Replacement: anti roll bar links – Ford Transit Mk7 van. Recommended sequence of steps:
Step 1
Secure the wheels with chocks.
Step 2
Loosen the wheel nuts on the front wheels. Use a 21 mm wheel impact socket. Use a tommy bar.
Step 3
Raise the vehicle.
Warning!
If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 4
Unscrew the nuts on one of the wheels and remove it.
Replacement: anti roll bar links – Ford Transit Mk7 van. Tip:
To avoid injury, hold up the wheel when unscrewing the nuts.
Step 5
Remove the other wheel in the same way.
Step 6
Clean the fasteners of one of the anti-roll bar links. Use a wire brush. Use WD-40 spray.
Step 7
Unscrew the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 19 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench.
Step 8
Unscrew the fastener connecting the anti-roll bar link to the suspension strut. Use a 19 mm socket. Use a ratchet wrench.
Step 9
Remove the anti-roll bar link.
Step 10
Follow the same steps to remove the other anti-roll bar link.
Step 11
Clean the mounting seats of the anti-roll bar link on one side of the axle. Use a wire brush. Use an all-purpose cleaning spray.
Step 12
Install a new anti-roll bar link and its fasteners.
Step 13
Tighten the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 20 mm combination spanner. Use a 17 mm socket. Use a torque wrench. Tightening torque: 55 N·m.
Step 14
Tighten the fastener connecting the anti-roll bar link to the suspension strut. Use a 20 mm combination spanner. Use a 17 mm socket. Use a torque wrench. Tightening torque: 55 N·m.
Step 15
Follow the same steps to install a new anti-roll bar link on the other side.
Step 16
Clean the mounting seat of one of the wheels. Use a wire brush. Use an all-purpose cleaning spray.
Step 17
Treat the wheel hub surface that contacts the wheel rim. Use ceramic grease.
Step 18
Install the wheel.
Replacement: anti roll bar links – Ford Transit Mk7 van. Tip from AUTODOC:
To avoid injury, hold up the wheel when screwing on the fastening nuts.
Step 19
Screw on the wheel nuts. Use a 21 mm wheel impact socket. Use a ratchet wrench.
Step 20
Reinstall the other wheel in the same way.
Step 21
Lower the car and tighten the wheel nuts in a criss-cross order. Use a 21 mm wheel impact socket. Use a torque wrench. Tightening torque: 200 N·m.
Step 22
Remove the jack, jack stands, and wheel chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Van (V347, V348) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD TRANSIT MK-7 Box
View more
How to check your head gasket | AUTODOC
How to paint a brake caliper | AUTODOC tips
The most common problems when buying a used car | AUTODOC
What to do if your car heater isn't working | AUTODOC tips