Disclaimer
How to change the front anti-roll bar links on the FORD Transit V363 Van (FCD, FDD) – replacement guide
downloads:
0
Views:
7
Important!
This replacement procedure can be used for:
FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) E-TRANSIT, FORD Transit Mk7 Van (V363, FCD, FDD) E-TRANSIT … View more
The steps may slightly vary depending on the car design.
FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi, FORD Transit Mk7 Van (V363, FCD, FDD) 2.2 TDCi RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue RWD, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue 4x4, FORD Transit Mk7 Van (V363, FCD, FDD) 2.0 EcoBlue, FORD Transit Mk7 Van (V363, FCD, FDD) E-TRANSIT, FORD Transit Mk7 Van (V363, FCD, FDD) E-TRANSIT … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Transit Mk7 Van (V363, FCD, FDD) and other FORD models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
20 mm combination spanner
10 mm socket
17 mm socket
19 mm socket
H5 Allen key
21 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Car lift or jack with jack stands, and wheel chocks
Replacement: anti roll bar links – FORD TRANSIT Custom Box. AUTODOC recommends:
- Replace the anti-roll bar links and bushes in pairs.
- The replacement procedure is identical for the anti-roll bar links and bushes on both sides of the same axle.
- All the work should be carried out with the ignition switched off.
Replacement: anti roll bar links – FORD TRANSIT Custom Box. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel nuts on the front wheels. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 3Raise the vehicle.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 4
Unscrew the nuts on one of the wheels and remove it.Replacement: anti roll bar links – FORD TRANSIT Custom Box. Tip:To avoid injury, hold up the wheel when unscrewing the nuts. - Step 5
Remove the other wheel in the same way. - Step 6
Clean the fasteners of one of the anti-roll bar links. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 19 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the anti-roll bar link to the suspension strut. Use a 19 mm socket. Use a ratchet wrench. - Step 9
Remove the anti-roll bar link. - Step 10
Follow the same steps to remove the other anti-roll bar link. - Step 11
Clean the mounting seats of the anti-roll bar link on one side of the axle. Use a wire brush. Use an all-purpose cleaning spray. - Step 12
Install a new anti-roll bar link and its fasteners. - Step 13
Tighten the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 20 mm combination spanner. Use a 17 mm socket. Use a torque wrench. Tightening torque: 55 N·m.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk7 Van (V363) model
Popular maintenance tutorials for Ford Transit V363
Free download PDF
1.57 MB
Free download PDF12.01 MB
Free download PDF788.48 KB
Free download PDF1.35 MB
Free download PDF2.09 MB
Free download PDF7.83 MB
Complete guides for changing the Drop links on different FORD TRANSIT models
Free download PDF1.52 MB
Free download PDF1.46 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Transit Mk7 Van (V363, FCD, FDD)
View more
Engine Overheating? Replace Your Cooling Fan to Fix It
DIY starter repair | AUTODOC tips
Checking the starter without removing it | AUTODOC tips
What causes engine misfire? | AUTODOC
Most commonly replaced car parts on FORD TRANSIT
Time to replace parts? Get even better deals in our Shop app.
SCAN ME