Disclaimer
How to change the front anti-roll bar links on the FORD Transit Mk6 Platform / Chassis (V347, V348) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi 4x4, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.3 16V RWD, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 3.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi 4x4, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.3 16V LPG RWD, FORD TRANSIT MK-7 Platform/Chassis 2.3 16V CNG RWD … View more
The steps may slightly vary depending on the car design.
FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi 4x4, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.3 16V RWD, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 3.2 TDCi RWD, FORD TRANSIT MK-7 Platform/Chassis 2.4 TDCi 4x4, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.2 TDCi, FORD TRANSIT MK-7 Platform/Chassis 2.3 16V LPG RWD, FORD TRANSIT MK-7 Platform/Chassis 2.3 16V CNG RWD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for TRANSIT MK-7 Platform/Chassis and other FORD models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
20 mm combination spanner
10 mm socket
17 mm socket
19 mm socket
H5 Allen key
21 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Car lift or jack with jack stands, and wheel chocks
Replacement: anti roll bar links – FORD TRANSIT MK-7 Platform/Chassis. AUTODOC recommends:
- Replace the anti-roll bar links and bushes in pairs.
- The replacement procedure is identical for the anti-roll bar links and bushes on both sides of the same axle.
- All the work should be carried out with the ignition switched off.
Replacement: anti roll bar links – FORD TRANSIT MK-7 Platform/Chassis. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel nuts on the front wheels. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 3Raise the vehicle.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 4
Unscrew the nuts on one of the wheels and remove it.Replacement: anti roll bar links – FORD TRANSIT MK-7 Platform/Chassis. Tip:To avoid injury, hold up the wheel when unscrewing the nuts. - Step 5
Remove the other wheel in the same way. - Step 6
Clean the fasteners of one of the anti-roll bar links. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 19 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the anti-roll bar link to the suspension strut. Use a 19 mm socket. Use a ratchet wrench. - Step 9
Remove the anti-roll bar link. - Step 10
Follow the same steps to remove the other anti-roll bar link. - Step 11
Clean the mounting seats of the anti-roll bar link on one side of the axle. Use a wire brush. Use an all-purpose cleaning spray. - Step 12
Install a new anti-roll bar link and its fasteners. - Step 13
Tighten the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 20 mm combination spanner. Use a 17 mm socket. Use a torque wrench. Tightening torque: 55 N·m.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Platform / Chassis (V347, V348) model.
Popular maintenance tutorials for FORD TRANSIT MK-7 Platform/Chassis
Free download PDF
1.57 MB
Free download PDF788.48 KB
Complete guides for changing the Drop links on different FORD TRANSIT models
Free download PDF1.52 MB
Free download PDF1.46 MB
Free download PDF1.46 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your FORD TRANSIT MK-7 Platform/Chassis
View more
How to easily repair a punctured tyre | AUTODOC tips
5 Tips for New Drivers | AUTODOC tips
How to wash your car in winter | AUTODOC tips
How to unlock your car without a key | AUTODOC tips
