Disclaimer
How to change serpentine belt on Toyota RAV4 II – replacement guide
downloads:
23
Views:
920
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
TOYOTA RAV 4 II (CLA2_, XA2_, ZCA2_, ACA2_) 2.4 4WD (ACA23, ACA22), TOYOTA RAV 4 II (CLA2_, XA2_, ZCA2_, ACA2_) 2.4 4WD (ACA23, ACA22) … View more
The steps may slightly vary depending on the car design.
TOYOTA RAV 4 II (CLA2_, XA2_, ZCA2_, ACA2_) 2.4 4WD (ACA23, ACA22), TOYOTA RAV 4 II (CLA2_, XA2_, ZCA2_, ACA2_) 2.4 4WD (ACA23, ACA22) … View more
The steps may slightly vary depending on the car design.
How to change serpentine belt on TOYOTA RAV4 II [TUTORIAL AUTODOC]

All the parts you need to replace – Poly V-Belt for RAV 4 II (CLA2_, XA2_, ZCA2_, ACA2_) and other TOYOTA models
Alternative products

Torque wrench
Drive socket # 19
Wheel impact socket #19
Ratchet wrench
Wheel chock
Replacement: serpentine belt – Toyota RAV4 II. Tip from AUTODOC:
- All work should be done with the engine stopped.
Replacement: serpentine belt – Toyota RAV4 II. Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3
Raise the car.Replacement: serpentine belt – Toyota RAV4 II. AUTODOC recommends:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Toyota RAV4 II - Step 5
Remove the wheel. - Step 6Unscrew and detach the engine side cover fasteners.Step 7Remove the engine cover.Step 8
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #19. - Step 9
Remove the V-ribbed belt.AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 10Return the tensioner pulley to its initial position.Step 11
Install the V-ribbed belt. - Step 12
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #19. - Step 13
Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA RAV4 II Off-Road (XA20) model
Popular maintenance tutorials for Toyota Rav4 II
Complete guides for changing the Alternator belt on different TOYOTA RAV4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA RAV 4 II (CLA2_, XA2_, ZCA2_, ACA2_)
View more
How to unlock your car without a key | AUTODOC tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Why Is the Windscreen Washer Not Spraying? Solution
How to Install a New Windscreen Yourself | AUTODOC Expert Tips
Most commonly replaced car parts on TOYOTA RAV4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















