How to carry out replacement: Engine Mount 2.0 HDI 110 Peugeot 406 Saloon
Disclaimer
Change Peugeot 406 Saloon 2.0 HDI 110 Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on PEUGEOT 406 Saloon – replacement guide

downloads: 8
Views: 114
Download your free tutorial and fix PEUGEOT 406 (8B) 2.0 16V problems yourself Download for free 1.49 MB Engine Mount for Peugeot 406 Saloon Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 406 (8B) 2.0 HDI 110, PEUGEOT 406 (8B) 2.0 HDI 90, PEUGEOT 406 (8B) 2.2 HDi, PEUGEOT 406 (8B) 2.0 HDi 110 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for 406 (8B) and other PEUGEOT models
How to change Engine mount on Peugeot 406 Saloon 2.0 HDI 110 – step-by-step instructions for straightforward car repair Engine mount
How to change Engine mount on 406 Saloon – tips for proper car maintenance
Engine mount for 406 Saloon Diesel (109 hp)
Simple DIY car repair steps – Replacing Engine mount on 406 Saloon
Engine mount for 406 Saloon Diesel (90 hp)
Easy tricks to help you to replace Engine mount on 406 Saloon
Engine mount for 406 Saloon Diesel (133 hp)
Engine mount removal & installation, incredibly easy steps for 406 Saloon
Engine mount for 406 Saloon Diesel (107 hp)
Tools
Replacement: engine mounts – PEUGEOT 406 (8B). Tools you might need:
Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Buy tools
Replacement: engine mounts – PEUGEOT 406 (8B). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 406 (8B). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Peugeot 406 Saloon 1995 - free PDF and video manuals
    Release the coolant reservoir retainers. Use a clip removal tool.
  2. Step 4
    How to replace PEUGEOT 406 (8B) 2.0 HDI 110 1996 Engine Mount - step-by-step manuals and video guides
    Remove the coolant reservoir cap.
  3. Step 5
    Peugeot 406 Saloon 1.8 16V 1997 Engine Mount replacement: free workshop manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – PEUGEOT 406 (8B). Do not use excessive force when removing the part as this may damage it.
  4. Step 6
    Changing Engine Mount on PEUGEOT 406 (8B) 2.1 TD 12V 1998 by yourself
    Support the engine in the oil pan area. Use a jack.
  5. Step 7
    How to remove PEUGEOT 406 1.9 TD 1999 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on PEUGEOT 406 (8B) 2000: download PDF manuals and video instructions
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Engine Mount replacement on Peugeot 406 Saloon 2.2 HDi 2001 - download illustrated guide
    Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Engine Mount on PEUGEOT 406 2002? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – PEUGEOT 406 (8B). AUTODOC recommends:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 11
    Changing of Engine Mount on Peugeot 406 Saloon 2003 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 12
    PEUGEOT 406 2.0 HDI 110 Engine Mount replacement: online guides and video tutorials
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Engine Mount on Peugeot 406 Saloon 2005 2.0 HDI 110 by yourself
    Treat the engine mount fasteners. Use a sealant.
  12. Step 14
    406 (8B) 1.9 TD 1995 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 15
    How to change Engine Mount on PEUGEOT 406 (8B) 1996 - tips and tricks
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 406 Saloon model.

Browse tyres

Popular maintenance tutorials for Peugeot 406 Saloon

More manuals for Peugeot 406 Saloon

Complete guides for changing the Engine mounts on different PEUGEOT 406 models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 406 (8B) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 406 (8B) Engine Mount replacement - online guide
Tips & tricks for your PEUGEOT 406 (8B)
View more
  • How to change Engine mounts on PEUGEOT 406 (8B) 2.0 HDI 90 - replacement tricks
    How to shine your tyres | AUTODOC tips
    3K views
    Published on: 07/04/2022
  • Changing Engine mounting Peugeot 406 Saloon 2.0 HDI 110 - Replacement Tips
    DIY jack restoration | AUTODOC tips
    12K views
    Published on: 22/09/2022
  • Maintenance Hacks - PEUGEOT 406 (8B) 1.8 16V Motor mounts replacement guide
    TOP 8 mistakes car owners make | AUTODOC tips
    14K views
    Published on: 09/12/2021
  • Replace Motor mount on Peugeot 406 Saloon - free video tips
    How to detect vacuum leaks using a smoke machine | AUTODOC
    19K views
    Published on: 23/07/2020

Most commonly replaced car parts on PEUGEOT 406

Professional manuals for the most common PEUGEOT models