Disclaimer
How to change right engine mounts on Peugeot 307 SW – replacement guide
downloads:
24
Views:
654
Important!
This replacement procedure can be used for:
PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.6 HDI 110, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.6 HDI 90 … View more
The steps may slightly vary depending on the car design.
PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.6 HDI 110, PEUGEOT 307 SW (3H) 2.0 16V, PEUGEOT 307 SW (3H) 1.6 HDI 90 … View more
The steps may slightly vary depending on the car design.
How to replace engine mount on PEUGEOT 307 (3H) [TUTORIAL AUTODOC]
All the parts you need to replace – Engine Mount for 307 SW (3H) and other PEUGEOT models
Engine mount
Alternative products
Engine mount
Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – Peugeot 307 SW. AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – Peugeot 307 SW. Recommended sequence of steps:
- Step 1
Open the bonnet. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Release the coolant reservoir retainers. Use a clip removal tool. - Step 4
Remove the coolant reservoir cap. - Step 5
Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – Peugeot 307 SW. Do not use excessive force when removing the part as this may damage it. - Step 6
Support the engine in the oil pan area. Use a jack. - Step 7
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench. - Step 9
Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench. - Step 10
Remove the engine mount.Replacement: engine mounts – Peugeot 307 SW. AUTODOC recommends:Carefully check the other engine mounts and replace them if necessary. - Step 11
Remove the fastening bolts. - Step 12
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray. - Step 13
Treat the engine mount fasteners. Use a sealant. - Step 14
Install the engine mount to its mounting seat. - Step 15
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 SW (3H) model.
Popular maintenance tutorials for Peugeot 307 SW
Free download PDF
7.01 MB
Free download PDF1.04 MB
Free download PDF1003.52 KB
Free download PDF849.92 KB
Free download PDF1.68 MB
Free download PDF1.59 MB
Complete guides for changing the Engine mounts on different PEUGEOT 307 models
Free download PDF1.48 MB
Free download PDF1.49 MB
Free download PDF1.49 MB
Free download PDF1.49 MB
Free download PDF870.4 KB
Free download PDF2.11 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your PEUGEOT 307 SW (3H)
View more
How to repair a chipped or cracked windscreen | AUTODOC tips
8 bad driving habits | AUTODOC tips
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
DIY alternator repair | AUTODOC tips
