Disclaimer
How to change rear engine mounts on Peugeot 207 hatchback – replacement guide
downloads:
46
Views:
664
Important!
This replacement procedure can be used for:
PEUGEOT 207 (WA_, WC_) 1.4, PEUGEOT 207 (WA_, WC_) 1.4 16V, PEUGEOT 207 (WA_, WC_) 1.4 16V, PEUGEOT 207 (WA_, WC_) 1.6 16V, PEUGEOT 207 (WA_, WC_) 1.4 HDi, PEUGEOT 207 (WA_, WC_) 1.4 16V, PEUGEOT 207 (WA_, WC_) 1.4 … View more
The steps may slightly vary depending on the car design.
PEUGEOT 207 (WA_, WC_) 1.4, PEUGEOT 207 (WA_, WC_) 1.4 16V, PEUGEOT 207 (WA_, WC_) 1.4 16V, PEUGEOT 207 (WA_, WC_) 1.6 16V, PEUGEOT 207 (WA_, WC_) 1.4 HDi, PEUGEOT 207 (WA_, WC_) 1.4 16V, PEUGEOT 207 (WA_, WC_) 1.4 … View more
The steps may slightly vary depending on the car design.
How to replace engine mount on PEUGEOT 207 [TUTORIAL AUTODOC]

All the parts you need to replace – Engine Mount for 207 (WA_, WC_) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 16
Ratchet wrench
Crow bar
Hydraulic transmission jack
Fender cover
Replacement: engine mounts – Peugeot 207 hatchback. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: engine mounts – Peugeot 207 hatchback. Recommended sequence of steps:
- Step 1Open the bonnet.Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Lift the car using a jack or place it over an inspection pit. - Step 4
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 5
Support the gearbox. Use a hydraulic transmission jack.Replacement: engine mounts – Peugeot 207 hatchback. Tip:Take care to prevent the gearbox from being unsupported (hanging). - Step 6
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench. - Step 7
Remove the fastening bolt. - Step 8
Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Remove the engine mount.Replacement: engine mounts – Peugeot 207 hatchback. Professionals recommend:Carefully check the other engine mounts and replace them if necessary. - Step 11
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray. - Step 12
Install the engine mount to its mounting seat. - Step 13
Install the fastening bolts. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 207 Hatchback model
Popular maintenance tutorials for Peugeot 207 Hatchback
Complete guides for changing the Engine mounts on different PEUGEOT 207 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 207 (WA_, WC_)
View more
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
TOP 8 mistakes car owners make | AUTODOC tips
How to easily repair a punctured tyre | AUTODOC tips
Top 5 possible reasons your car is shaking or vibrating
Most commonly replaced car parts on PEUGEOT 207
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























