How to carry out replacement: Engine Mount 1.6 HDi Peugeot 2008 Estate
Disclaimer
Change Peugeot 2008 Estate 1.6 BlueHDi Engine Mount yourself – manuals and video tutorials

How to change rear engine mounts on PEUGEOT 2008 Estate (CU_) – replacement guide

downloads: 49
Views: 588
Download your free tutorial and fix PEUGEOT 2008 Estate (CU_) 1.6 HDi problems yourself Download for free 1.99 MB Engine Mount for Peugeot 2008 Estate Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 2008 Estate (CU_) 1.4 HDi, PEUGEOT 2008 Estate (CU_) 1.6 VTi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for 2008 Estate (CU_) and other PEUGEOT models
Alternative products
How to change Engine mount on Peugeot 2008 Estate 1.6 HDi – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – PEUGEOT 2008. Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 16
Ratchet wrench
Crow bar
Hydraulic transmission jack
Fender cover
Buy tools
Replacement: engine mounts – PEUGEOT 2008. AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 2008. Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Engine Mount on Peugeot 2008 Estate 2013 - free PDF and video manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace PEUGEOT 2008 Estate (CU_) 1.6 HDi 2014 Engine Mount - step-by-step manuals and video guides
    Support the gearbox. Use a hydraulic transmission jack.
    Replacement: engine mounts – PEUGEOT 2008. Tip:
    Take care to prevent the gearbox from being unsupported (hanging).
  3. Step 6
    Peugeot 2008 Estate 1.6 BlueHDi 2015 Engine Mount replacement: free workshop manuals
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
  4. Step 7
    Changing Engine Mount on PEUGEOT 2008 Estate (CU_) 1.2 THP / PureTech 2016 by yourself
    Remove the fastening bolt.
  5. Step 8
    How to remove PEUGEOT 2008 1.6 VTi 2017 Engine Mount - online easy-to-follow instructions
    Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench.
  6. Step 9
    How to replace Engine Mount on PEUGEOT 2008 Estate (CU_) 2018: download PDF manuals and video instructions
    Remove the fastening bolt.
  7. Step 10
    How hard is it to do yourself: Engine Mount replacement on Peugeot 2008 Estate 1.2 PureTech 2019 - download illustrated guide
    Remove the engine mount.
    Replacement: engine mounts – PEUGEOT 2008. Professionals recommend:
    Carefully check the other engine mounts and replace them if necessary.
  8. Step 11
    Need to know how to renew Engine Mount on PEUGEOT 2008 2020? This free workshop manual will help you to do it yourself
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  9. Step 12
    Changing of Engine Mount on Peugeot 2008 Estate 2021 won't be an issue if you follow this illustrated step-by-step guide
    Install the engine mount to its mounting seat.
  10. Step 13
    PEUGEOT 2008 1.6 BlueHDi Engine Mount replacement: online guides and video tutorials
    Install the fastening bolts. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 2008 Estate (CU_) model

Peugeot 2008 Estate tyre size

Popular maintenance tutorials for Peugeot 2008 Estate

More manuals for Peugeot 2008 Estate

Complete guides for changing the Engine mounts on different PEUGEOT 2008 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 2008 Estate (CU_) Engine Mount replacement - online guide
Tips & tricks for your PEUGEOT 2008 Estate (CU_)
View more
  • How to change Engine mounts on PEUGEOT 2008 Estate (CU_) 1.2 VTi - replacement tricks
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
    9K views
    Published on: 04/07/2024
  • Changing Engine mounting Peugeot 2008 Estate 1.6 HDi - Replacement Tips
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
    7K views
    Published on: 13/05/2021
  • Maintenance Hacks - PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi Motor mounts replacement guide
    What to do if your check engine light is on | AUTODOC tips
    19K views
    Published on: 19/08/2020
  • Replace Motor mount on Peugeot 2008 Estate - free video tips
    Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
    8K views
    Published on: 29/06/2023

Most commonly replaced car parts on PEUGEOT 2008

Professional manuals for the most common PEUGEOT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 2008 Estate (CU_) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME