Important!
This replacement procedure can be used for:
PEUGEOT 406 (8B) 1.6, PEUGEOT 406 (8B) 1.8 16V, PEUGEOT 406 (8B) 2.0 16V, PEUGEOT 406 (8B) 1.9 TD, PEUGEOT 406 (8B) 2.1 TD 12V, PEUGEOT 406 (8B) 2.0 Turbo, PEUGEOT 406 (8B) 1.9 TD, PEUGEOT 406 (8B) 1.8, PEUGEOT 406 (8B) 2.0 HDI, PEUGEOT 406 (8B) 2.0 HDI, PEUGEOT 406 (8B) 2.0 16V, PEUGEOT 406 (8B) 1.8 16V, PEUGEOT 406 (8B) 2.0 16V, PEUGEOT 406 (8B) 2.2 HDi, PEUGEOT 406 (8B) 2.0 16V HPi, PEUGEOT 406 (8B) 2.0 HDi, PEUGEOT 406 (8B) 2.0 View more

The steps may slightly vary depending on the car design.

How to change Rear Springs on PEUGEOT 406 TUTORIAL | AUTODOC

video
All the parts you need to replace – Springs for 406 (8B) and other PEUGEOT models
Alternative products
How to change Coil spring on Peugeot 406 Saloon 2.0 HDI – step-by-step instructions for straightforward car repair Coil spring
Tools
Replacement: coil springs – Peugeot 406 saloon. Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Combination spanner #18
Combination spanner #18
Drive socket # 18
Drive socket # 21
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hammer
Pin punch
Hydraulic transmission jack
Crow bar
Wheel chock
Replacement: coil springs – Peugeot 406 saloon. AUTODOC recommends:
  • Both coil springs of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right coil springs of the rear suspension.
  • All work should be done with the engine stopped.
Replacement: coil springs – Peugeot 406 saloon. Recommended sequence of steps:
  1. Step 1
    How to change Springs on Peugeot 406 Saloon 1995 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 406 (8B) 2.0 HDI 1996 Springs - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Peugeot 406 Saloon 1.8 16V 1997 Springs replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Springs on PEUGEOT 406 (8B) 1.9 TD 1998 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Peugeot 406 saloon
  5. Step 5
    How to remove PEUGEOT 406 2.0 HDi 1999 Springs - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Springs on PEUGEOT 406 (8B) 2000: download PDF manuals and video instructions
    Support the rear control arm. Use a hydraulic transmission jack.
  7. Step 7
    How hard is it to do yourself: Springs replacement on Peugeot 406 Saloon 2.0 16V 2001 - download illustrated guide
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 8
    Need to know how to renew Springs on PEUGEOT 406 2002? This free workshop manual will help you to do it yourself
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  9. Step 9
    Changing of Springs on Peugeot 406 Saloon 2003 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolt.
  10. Step 10
    Clean the fastener connecting the rear knuckle to the suspension control arm. Use a wire brush. Use WD-40 spray.
    Step 11
    PEUGEOT 406 1.8 16V Springs replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #21. Use a drive socket #21. Use a ratchet wrench.
  11. Step 12
    Remove the fastening bolt. Use a pin punch. Use a hammer.
    Step 13
    Replacing Springs on Peugeot 406 Saloon 2005 2.0 HDI by yourself
    Disconnect the ABS sensor wiring. Use a crowbar.
  12. Step 14
    406 (8B) 2.0 HDi 1995 Springs DIY replacement workshop manual
    Remove the support from under the rear control arm.
    AUTODOC recommends:
    Peugeot 406 saloon – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
  13. Step 15
    How to change Springs on PEUGEOT 406 (8B) 1996 - tips and tricks
    Take out the spring.
  14. Step 16
    Remove the rubber spring spacer.
    Replacement: coil springs – Peugeot 406 saloon. Tip:
    Inspect the rubber mounts of the suspension spring. Replace if necessary.
    Step 17
    Step-by-step recommendations for DIY replacement Peugeot 406 Saloon 1997 2.0 HDi Springs
    Install the rubber spring spacer.
  15. Step 18
    DIY replacement of Springs on PEUGEOT 406 (8B) 2.1 TD 12V 1998 is not an issue anymore with our step-by-step tutorial
    Install the coil spring together with the rubber mounts into the mounting seats.
  16. Step 19
    How to change Springs on Peugeot 406 Saloon 1995 - free PDF and video manuals
    Support the rear control arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 406 Saloon model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 406 (8B) Springs replacement - online guide
Tips & tricks for your PEUGEOT 406 (8B)
View more
  • How to change Springs on PEUGEOT 406 (8B) 2.1 TD 12V - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing Coil springs Peugeot 406 Saloon 2.0 HDI - Replacement Tips
    5 mistakes made when washing the engine | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 406 (8B) 1.8 16V Spring replacement guide
    Top 7 signs of a bad starter
  • Replace Suspension spring on Peugeot 406 Saloon - free video tips
    Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 406 (8B) Springs replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME