Disclaimer
How to change rear coil springs on Peugeot 107 PM PN – replacement guide
downloads:
12
Views:
107
Important!
This replacement procedure can be used for:
PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi … View more
The steps may slightly vary depending on the car design.
How to change rear springs / rear coil springs on PEUGEOT 107 1 (PM, PN) [TUTORIAL AUTODOC]

All the parts you need to replace – Springs for 107 Hatchback (PM_, PN_) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 14
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: coil springs – Peugeot 107 PM PN. AUTODOC experts recommend:
- Both coil springs of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right coil springs of the rear suspension.
- All work should be done with the engine stopped.
Replacement: coil springs – Peugeot 107 PM PN. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the rear of the car and secure on supports. - Step 4
Unscrew the wheel bolts.Replacement: coil springs – Peugeot 107 PM PN. Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 8
Unscrew the lower fastener of the shock absorber. Use a drive socket #14. Use a ratchet wrench. - Step 9Remove the fastening bolt.Step 10
Remove the mounting from under the rear axle beam.AUTODOC recommends:Peugeot 107 PM PN – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car. - Step 11
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 12
Unscrew the lower fastener of the shock absorber. Use a drive socket #14. Use a ratchet wrench. - Step 13
Remove the fastening bolt. - Step 14
Remove the mounting from under the rear axle beam.AUTODOC recommends:Replacement: coil springs – Peugeot 107 PM PN. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms. - Step 15
Remove the spring.Replacement: coil springs – Peugeot 107 PM PN. Tip from AUTODOC:Inspect the rubber mounts of the suspension spring. Replace if necessary. - Step 16
Clean the coil spring mounting seats. Use a wire brush. Use WD-40 spray. - Step 17
Install the coil spring together with the rubber mounts into the mounting seats.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 107 Hatchback (PM, PN) model
Popular maintenance tutorials for Peugeot 107 PN
Complete guides for changing the Springs on different PEUGEOT 107 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 107 Hatchback (PM_, PN_)
View more
Engine Overheating? Replace Your Cooling Fan to Fix It
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
Most commonly replaced car parts on PEUGEOT 107
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























