How to carry out replacement: Anti Roll Bar Links 2.0 16V TDDi / TDCi Ford Mondeo Mk3
Disclaimer
Change Ford Mondeo Mk3 1.8 SCi Anti Roll Bar Links yourself – manuals and video tutorials

How to change rear anti roll bar links on FORD MONDEO III (B5Y) – replacement guide

downloads: 3
Views: 27
Download your free tutorial and fix FORD MONDEO III (B5Y) 2.0 16V DI / TDDi / TDCi problems yourself Download for free 1.24 MB Anti Roll Bar Links for Ford Mondeo Mk3 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD MONDEO III (B5Y) 1.8 16V, FORD MONDEO III (B5Y) 1.8 16V, FORD MONDEO III (B5Y) 2.0 16V, FORD MONDEO III (B5Y) 2.5 V6 24V, FORD MONDEO III (B5Y) 2.0 16V DI / TDDi / TDCi, FORD MONDEO III (B5Y) 2.0 16V TDDi / TDCi, FORD MONDEO III (B5Y) 2.0 TDCi, FORD MONDEO III (B5Y) ST220, FORD MONDEO III (B5Y) 1.8 SCi, FORD MONDEO III (B5Y) 2.2 TDCi, FORD MONDEO III (B5Y) 3.0 V6 24V … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for MONDEO III (B5Y) and other FORD models
Alternative products
How to change Anti-roll bar link on Ford Mondeo Mk3 2.0 16V TDDi / TDCi – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – FORD MONDEO III (B5Y). Professionals recommend:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #17
Combination spanner #19
Drive socket # 17
HEX bit No.H6
Wheel impact socket #19
Ratchet wrench
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on FORD MONDEO III (B5Y) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – FORD MONDEO III (B5Y) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Ford Mondeo Mk3 2000 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace FORD MONDEO III (B5Y) 2.0 16V TDDi / TDCi 2001 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FORD MONDEO III (B5Y)
  3. Step 5
    Ford Mondeo Mk3 2.0 TDCi 2002 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on FORD MONDEO III (B5Y) 1.8 16V 2003 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove FORD MONDEO 2.2 TDCi 2004 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on FORD MONDEO III (B5Y) 2005: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a combination spanner #17.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Ford Mondeo Mk3 ST220 3.0 2006 - download illustrated guide
    Remove the stabiliser link.
    Replacement: anti roll bar links – FORD MONDEO III (B5Y). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on FORD MONDEO 2007? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Ford Mondeo Mk3 2000 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners. Use a combination spanner #19. Use HEX No.H6.
  10. Step 12
    FORD MONDEO 1.8 SCi Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use a drive socket #19. Use HEX No.H6. Use a torque wrench. Tighten it to 48 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Hatchback (B5Y) model

Ford Mondeo Mk3 tyre size

Popular maintenance tutorials for Ford Mondeo Mk3

More manuals for Ford Mondeo Mk3

Complete guides for changing the Drop links on different FORD MONDEO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD MONDEO III (B5Y) Anti Roll Bar Links replacement - online guide
Tips & tricks for your FORD MONDEO III (B5Y)
View more
  • How to change Drop links on FORD MONDEO III (B5Y) 2.0 16V - replacement tricks
    5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
    5K views
    Published on: 23/09/2021
  • Changing Stabilizer link Ford Mondeo Mk3 2.0 16V TDDi / TDCi - Replacement Tips
    TOP 8 mistakes car owners make | AUTODOC tips
    14K views
    Published on: 09/12/2021
  • Maintenance Hacks - FORD MONDEO III (B5Y) 2.0 TDCi Sway bar link replacement guide
    How to remove scratches from car plastic | AUTODOC tips
    187K views
    Published on: 15/12/2022
  • Replace Drop link on Ford Mondeo Mk3 - free video tips
    Top 5 brake repair mistakes | AUTODOC tips
    197K views
    Published on: 27/10/2022

Most commonly replaced car parts on FORD MONDEO

Professional manuals for the most common FORD models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD MONDEO III (B5Y) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME