Important!
This replacement procedure can be used for:
FORD MONDEO III Estate (BWY) 1.8 16V, FORD MONDEO III Estate (BWY) 1.8 16V, FORD MONDEO III Estate (BWY) 2.0 16V, FORD MONDEO III Estate (BWY) 2.5 V6 24V, FORD MONDEO III Estate (BWY) 2.0 16V DI / TDDi / TDCi, FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi, FORD MONDEO III Estate (BWY) 2.0 TDCi, FORD MONDEO III Estate (BWY) ST220, FORD MONDEO III Estate (BWY) 1.8 SCi, FORD MONDEO III Estate (BWY) 2.2 TDCi, FORD MONDEO III Estate (BWY) 3.0 V6 24V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for MONDEO III Estate (BWY) and other FORD models
Tools
Replacement: anti roll bar links – FORD MONDEO III Estate (BWY). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on FORD MONDEO III Estate (BWY) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – FORD MONDEO III Estate (BWY) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Ford Mondeo bwy 2000 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace FORD MONDEO III Estate (BWY) 2.0 16V 2001 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FORD MONDEO III Estate (BWY)
  3. Step 5
    Ford Mondeo bwy 2.0 TDCi 2002 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on FORD MONDEO III Estate (BWY) 1.8 16V 2003 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove FORD MONDEO 2.2 TDCi 2004 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on FORD MONDEO III Estate (BWY) 2005: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Ford Mondeo bwy ST220 3.0 2006 - download illustrated guide
    Remove the stabiliser link.
    Replacement: anti roll bar links – FORD MONDEO III Estate (BWY). Tip from AUTODOC:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on FORD MONDEO 2007? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Ford Mondeo bwy 2000 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link.
  10. Step 12
    FORD MONDEO 1.8 SCi Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the stabiliser link fastener. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  11. Step 13
    Replacing Anti Roll Bar Links on Ford Mondeo bwy 2002 2.0 16V by yourself
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a torque wrench. Tighten it to 48 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Estate (BWY) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD MONDEO III Estate (BWY) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD MONDEO III Estate (BWY) Anti Roll Bar Links replacement - online guide
Tips & tricks for your FORD MONDEO III Estate (BWY)
View more
  • How to change Drop links on FORD MONDEO III Estate (BWY) 2.0 16V TDDi / TDCi - replacement tricks
    Causes of a worn car boot damper | AUTODOC
  • Changing Stabilizer link Ford Mondeo bwy 2.0 16V - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - FORD MONDEO III Estate (BWY) 2.0 TDCi Sway bar link replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Replace Drop link on Ford Mondeo bwy - free video tips
    What causes engine misfire? | AUTODOC