Disclaimer
How to change front anti roll bar links on FORD Puma Off-Road – replacement guide
downloads:
3
Views:
31
Important!
This replacement procedure can be used for:
FORD Puma Off-Road 1.0 EcoBoost, FORD Puma Off-Road 1.0 EcoBoost … View more
The steps may slightly vary depending on the car design.
FORD Puma Off-Road 1.0 EcoBoost, FORD Puma Off-Road 1.0 EcoBoost … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Puma Off-Road and other FORD models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
HEX bit no.H5.
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FORD Puma SUV. AUTODOC experts recommend:
- Replace the stabiliser links on FORD Puma SUV in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Warning! Shut down the engine before starting any work – FORD Puma SUV.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. FORD Puma SUV - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – FORD Puma SUV. AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Puma Off-Road model
Popular maintenance tutorials for FORD Puma SUV
Free download PDF
1.11 MB
Free download PDF7.83 MB
Free download PDF2.14 MB
Free download PDF2.92 MB
Free download PDF1.58 MB
Free download PDF1.99 MB
Complete guides for changing the Drop links on different FORD PUMA models
Free download PDF1.26 MB
Free download PDF972.8 KB
Free download PDF1.99 MB
Free download PDF1.31 MB
Free download PDF1.29 MB
Free download PDF1.27 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Puma Off-Road
View more
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Coolant comparison test | AUTODOC
How to choose the right engine oil for your car | AUTODOC
Most commonly replaced car parts on FORD PUMA
Time to replace parts? Get even better deals in our Shop app.
SCAN ME