Important!

This replacement procedure can be used for:
ABARTH 500 / 595 / 695 Hatchback (312_) 1.4 (312.AXD1A)

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on ABARTH 500 (312) [TUTORIAL AUTODOC]

Replacement: anti roll bar links – Abarth 595. Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Ring spanner #18
                      
                        Drive socket # 18 
                      
                        HEX bit No.H5
                      
                        Wheel impact socket #19
                      
                        Torque wrench
                      
                        Fender cover
                      
                        Wheel chock

All the parts you need to replace – Anti Roll Bar Links for 500 / 595 / 695 Hatchback (312_) and other ABARTH models

ABARTH 500 / 595 / 695 Hatchback (312_) 1.4 (312.AXD1A)

AUTODOC recommends:

Replace the stabiliser links on Abarth 595 in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Warning! Shut down the engine before starting any work – Abarth 595.

Carry out replacement in the following order:

Step 1

Open the bonnet.
Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3

Secure the wheels with chocks.
Step 4

Loosen the wheel mounting bolts.Use wheel impact socket #19.
Step 5

Raise the front of the car and secure on supports.
Step 6

Unscrew the wheel bolts.

AUTODOC recommends:

Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Abarth 595
Step 7

Remove the wheel.
Step 8

Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
Step 9

Unscrew the nut and remove the stabilizer rod from the shock strut.Use box wrench #18. Use a drive socket #18.Use HEX No.H5.
Step 10

Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
Step 11

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar.Use box wrench #18. Use HEX No.H5.
Step 12

Remove the stabilizer rod.
Step 13

Clean all joints of the stabiliser link.Use a wire brush.Use WD-40 spray.
Step 14.1

Install a new rod, tighten the fasteners.

Step 14.2

Use box wrench #18. Use a drive socket #18.Use HEX No.H5.Use a torque wrench.Tighten it to 55 Nm torque.
Step 15

Clean the wheel rim mounting seat. Use a wire brush.Treat the contacting surface.Use copper grease.
Step 16

Install the wheel.

AUTODOC recommends:

Important! Hold the wheel while screwing in the fastening bolts. Abarth 595
Step 17

Screw in the wheel bolts.Use wheel impact socket #19.
Step 18

Lower the car.
Step 19

Remove the fender protection cover.
Step 20

Tighten the wheel bolts using a criss-cross pattern.Use a torque wrench.Tighten it to 110 Nm torque.
Step 21

Remove the jacks and chocks.

Step 22

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front strut mount on Abarth 595 – replacement guide

Free download PDF

10.42 MB
How to change front lower arm on Abarth 595 – replacement guide

Free download PDF

15.48 MB
How to change: Abarth 595 pollen filter – replacement guide

Free download PDF

6.13 MB
How to change: Abarth 595 rear shock absorbers – replacement guide

Free download PDF

5.26 MB
How to change front brake discs on Abarth 595 – replacement guide

Free download PDF

7.63 MB
How to change ignition coil on Abarth 595 – replacement guide

Free download PDF

9.5 MB
How to change front brake pads on Abarth 595 – replacement guide

Free download PDF

6.61 MB
How to change: Abarth 595 spark plugs – replacement guide

Free download PDF

10.54 MB
How to change: Abarth 595 front suspension strut – replacement guide

Free download PDF

11.56 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your ABARTH 500 / 595 / 695 Hatchback (312_)

How to remove a broken bolt without welding | AUTODOC tips

260K views

Published on: 11/03/2020
Noise from under the hood | AUTODOC TIPS

198K views

Published on: 25/08/2019
How to fix a knocking and creaking suspension | AUTODOC

181K views

Published on: 08/09/2019
6 SIGNS OF A BAD FUEL FILTER | AUTODOC

163K views

Published on: 24/07/2019