Important!

This replacement procedure can be used for:
ABARTH Grande Punto (199_) 1.4 ESSEESSE / SUPERSPORT (199.AXX1B), ABARTH Grande Punto (199_) 1.4 (199.AXN1B) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Grande Punto (199_) and other ABARTH models

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – ABARTH Grande Punto (199_). Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner
                    
                      Copper grease
                    
                      Combination spanner #15
                    
                      Combination spanner #17
                    
                      Drive socket # 15
                    
                      Drive socket # 17
                    
                      HEX bit no.H5.
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – ABARTH Grande Punto (199_). Professionals recommend:

Replace the stabiliser links on ABARTH Grande Punto (199_) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – ABARTH Grande Punto (199_). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – ABARTH Grande Punto (199_). Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Step 8

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #15. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – ABARTH Grande Punto (199_). AUTODOC recommends:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 50 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 50 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

Replacement: anti roll bar links – ABARTH Grande Punto (199_). AUTODOC experts recommend:
After applying the spray, wait a few minutes.
Step 17

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. ABARTH Grande Punto (199_)
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the ABARTH Grande Punto (199_) model

ABARTH Grande Punto (199_) tyre size

How to change front lower arm on ABARTH Grande Punto (199_) – replacement guide

Free download PDF
2 MB
How to change track rod end on ABARTH Grande Punto (199_) – replacement guide

Free download PDF
1.49 MB
How to change rear windshield wipers on ABARTH Grande Punto (199_) – replacement guide

Free download PDF
573.44 KB
How to change front windshield wipers on ABARTH Grande Punto (199_) – replacement guide

Free download PDF
583.68 KB
How to change engine oil and filter on ABARTH Grande Punto (199_) – replacement guide

Free download PDF
1.94 MB
How to change front suspension strut on ABARTH Grande Punto (199_) – replacement guide

Free download PDF
3.22 MB

How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Abarth 595 – replacement guide

Free download PDF
2.23 MB
How to change front anti roll bar links on ABARTH 500C / 595C / 695C Convertible (312) – replacement guide

Free download PDF
1.71 MB
How to change front anti roll bar links on ABARTH PUNTO (199_) – replacement guide

Free download PDF
1.29 MB
How to change front anti roll bar links on VW Polo 9N – replacement guide

Free download PDF
1.99 MB
How to change front anti roll bar links on Toyota Yaris P1 – replacement guide

Free download PDF
1.61 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

7 signs of faulty fuel injectors | AUTODOC tips

9K views

Published on: 09/01/2025
How to prevent car windows from fogging up | AUTODOC tips

13K views

Published on: 04/02/2021
K2 ROTON wheel cleaner overview

3K views

Published on: 27/03/2025
TOP 5 mistakes during DIY oil change | AUTODOC tips

36K views

Published on: 17/06/2021