Disclaimer
How to change front anti roll bar links on ABARTH PUNTO (199_) – replacement guide
downloads:
2
Views:
15
Important!
This replacement procedure can be used for:
ABARTH PUNTO (199_) 1.4 SUPERSPORT (199.AXX1B), ABARTH PUNTO (199_) 1.4 (199.AXX1B) … View more
The steps may slightly vary depending on the car design.
ABARTH PUNTO (199_) 1.4 SUPERSPORT (199.AXX1B), ABARTH PUNTO (199_) 1.4 (199.AXX1B) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for PUNTO (199_) and other ABARTH models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
Combination spanner #17
Drive socket # 15
Drive socket # 17
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – ABARTH PUNTO (199_). Professionals recommend:
- Replace the stabiliser links on ABARTH PUNTO (199_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – ABARTH PUNTO (199_). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – ABARTH PUNTO (199_). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #15. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – ABARTH PUNTO (199_). AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ABARTH Punto (199) model
Popular maintenance tutorials for ABARTH PUNTO (199_)
Free download PDF
2 MB
Free download PDF1.49 MB
Free download PDF563.2 KB
Free download PDF573.44 KB
Free download PDF1.93 MB
Free download PDF983.04 KB
Complete guides for changing the Drop links on different ABARTH PUNTO models
Free download PDF972.8 KB
Free download PDF2.23 MB
Free download PDF1.29 MB
Free download PDF1.61 MB
Free download PDF1.99 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ABARTH PUNTO (199_)
View more
The most common problems when buying a used car | AUTODOC
Checking the starter without removing it | AUTODOC tips
Don’t Replace, Restore: Fixing Damaged Threads at Home
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Most commonly replaced car parts on ABARTH PUNTO
Professional manuals for the most common ABARTH models
Time to replace parts? Get even better deals in our Shop app.
SCAN ME