Important!
This replacement procedure can be used for:
FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 Ti, FORD Focus II Hatchback (DA_, HCP, DP) 2.0, FORD Focus II Hatchback (DA_, HCP, DP) 1.4, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.5 ST, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 Flexifuel, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8, FORD Focus II Hatchback (DA_, HCP, DP) 2.5 RS, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 CNG, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 LPG, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 LPG, FORD Focus II Hatchback (DA_, HCP, DP) 2.5 RS 500 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Focus II Hatchback (DA_, HCP, DP) and other FORD models
Tools
Replacement: track rod end – FORD FOCUS II (DA_). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #24
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – FORD FOCUS II (DA_). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – FORD FOCUS II (DA_). Use the following procedure:
  1. Step 1
    How to change Track Rod End on Ford Focus Mk2 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi 2005 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Ford Focus Mk2 1.8 TDCi 2006 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – FORD FOCUS II (DA_). AUTODOC experts recommend:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on FORD Focus II Hatchback (DA_, HCP, DP) 2.5 ST 2007 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD FOCUS 1.6 Ti 2008 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 7
    Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
    Step 8
    How to replace Track Rod End on FORD Focus II Hatchback (DA_, HCP, DP) 2009: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  7. Step 9
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 10
    How hard is it to do yourself: Track Rod End replacement on Ford Focus Mk2 1.8 Flexifuel 2010 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #15. Use a ratchet wrench.
  8. Step 11
    Need to know how to renew Track Rod End on FORD FOCUS 2011? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 12
    Changing of Track Rod End on Ford Focus Mk2 2012 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 13
    FORD FOCUS 2.0 Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 14
    Replacing Track Rod End on Ford Focus Mk2 2005 1.6 TDCi by yourself
    Treat the mounting seats of the tie rod end. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Hatchback (DA_, HCP, DP) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD Focus II Hatchback (DA_, HCP, DP) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD Focus II Hatchback (DA_, HCP, DP) Track Rod End replacement - online guide
Tips & tricks for your FORD Focus II Hatchback (DA_, HCP, DP)
View more
  • How to change Tie rod end on FORD Focus II Hatchback (DA_, HCP, DP) 1.6 - replacement tricks
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Changing Outer tie rod Ford Focus Mk2 1.6 TDCi - Replacement Tips
    How do EGR valves work? | AUTODOC
  • Maintenance Hacks - FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi Track rod end ball joint replacement guide
    How to polish your car | AUTODOC tips
  • Replace Outer tie rod end on Ford Focus Mk2 - free video tips
    Car checks you need to carry out on your car after the winter | AUTODOC tips