Disclaimer
How to change track rod end on FORD FOCUS II Convertible – replacement guide
downloads:
0
Views:
7
Important!
This replacement procedure can be used for:
FORD FOCUS II Convertible 2.0 TDCi, FORD FOCUS II Convertible 2.0, FORD FOCUS II Convertible 1.6 … View more
The steps may slightly vary depending on the car design.
FORD FOCUS II Convertible 2.0 TDCi, FORD FOCUS II Convertible 2.0, FORD FOCUS II Convertible 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Track Rod End for FOCUS II Convertible and other FORD models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #24
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – FORD FOCUS II Convertible. AUTODOC recommends:
- Replace tie rod ends in pairs.
- The replacement procedure is identical for the right and left tie rod ends.
- All work should be done with the engine stopped.
Replacement: track rod end – FORD FOCUS II Convertible. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: track rod end – FORD FOCUS II Convertible. AUTODOC experts recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper. - Step 7Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.Step 8
Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24. - Step 9Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.Step 10
Unscrew the end fastening nut to the steering knuckle. Use a drive socket #15. Use a ratchet wrench. - Step 11
Disconnect the tie rod end from the steering knuckle. Use a ball joint puller. - Step 12
Screw the end out of the tie rod. - Step 13
Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray. - Step 14
Treat the mounting seats of the tie rod end. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Convertible (DB3) model
Popular maintenance tutorials for Ford Focus DB3
Complete guides for changing the Tie rod end on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FOCUS II Convertible
View more
K2 ROTON wheel cleaner overview
How to remove scratches from car plastic | AUTODOC tips
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























