How to carry out replacement: Track Rod End 1.6 TDCi Focus C-Max (DM2)
Disclaimer
Change Focus C-Max (DM2) 2.0 TDCi Track Rod End yourself – manuals and video tutorials

How to change track rod end on FORD Focus C-Max (DM2) – replacement guide

downloads: 4
Views: 34
Download your free tutorial and fix FORD Focus C-Max (DM2) 1.6 TDCi problems yourself Download for free 1.38 MB Track Rod End for Focus C-Max (DM2) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD Focus C-Max (DM2) 2.0 TDCi, FORD Focus C-Max (DM2) 1.8, FORD Focus C-Max (DM2) 1.6 TDCi, FORD Focus C-Max (DM2) 2.0 TDCi, FORD Focus C-Max (DM2) 1.6, FORD Focus C-Max (DM2) 2.0, FORD Focus C-Max (DM2) 1.8, FORD Focus C-Max (DM2) 1.6 Ti, FORD Focus C-Max (DM2) 1.6 TDCi, FORD Focus C-Max (DM2) 1.8 TDCi, FORD Focus C-Max (DM2) 1.8 Flexifuel, FORD Focus C-Max (DM2) 1.8 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Focus C-Max (DM2) and other FORD models
Alternative products
How to change Track rod end on Focus C-Max (DM2) 1.6 TDCi – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – FORD FOCUS C-MAX. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #24
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Buy tools
Replacement: track rod end – FORD FOCUS C-MAX. AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – FORD FOCUS C-MAX. Use the following procedure:
  1. Step 1
    How to change Track Rod End on Focus C-Max (DM2) 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FORD Focus C-Max (DM2) 1.6 TDCi 2004 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Focus C-Max (DM2) 2.0 TDCi 2005 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – FORD FOCUS C-MAX. AUTODOC experts recommend:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on FORD Focus C-Max (DM2) 1.6 2006 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FORD FOCUS 1.8 2007 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 7
    Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
    Step 8
    How to replace Track Rod End on FORD Focus C-Max (DM2) 2003: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  7. Step 9
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 10
    How hard is it to do yourself: Track Rod End replacement on Focus C-Max (DM2) 2.0 2004 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #15. Use a ratchet wrench.
  8. Step 11
    Need to know how to renew Track Rod End on FORD FOCUS 2005? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 12
    Changing of Track Rod End on Focus C-Max (DM2) 2006 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 13
    FORD FOCUS 2.0 TDCi Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 14
    Replacing Track Rod End on Focus C-Max (DM2) 2003 1.6 TDCi by yourself
    Treat the mounting seats of the tie rod end. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus C-Max (DM2) model

Focus C-Max (DM2) tyre size

Popular maintenance tutorials for Focus C-Max (DM2)

More manuals for Focus C-Max (DM2)

Complete guides for changing the Tie rod end on different FORD FOCUS models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Focus C-Max (DM2) Track Rod End replacement - online guide
Tips & tricks for your FORD Focus C-Max (DM2)
View more
  • How to change Tie rod end on FORD Focus C-Max (DM2) 1.8 TDCi - replacement tricks
    How to prevent car windows from fogging up | AUTODOC tips
    13K views
    Published on: 04/02/2021
  • Changing Outer tie rod Focus C-Max (DM2) 1.6 TDCi - Replacement Tips
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
    4K views
    Published on: 10/03/2022
  • Maintenance Hacks - FORD Focus C-Max (DM2) 2.0 TDCi Track rod end ball joint replacement guide
    When, why, and how to change engine oil | AUTODOC tips
    6K views
    Published on: 16/08/2024
  • Replace Outer tie rod end on Focus C-Max (DM2) - free video tips
    How to choose the right engine oil for your car | AUTODOC
    12K views
    Published on: 01/07/2020

Most commonly replaced car parts on FORD FOCUS

Professional manuals for the most common FORD models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Focus C-Max (DM2) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME