How to change spark plugs on VW Lupo 6X1 – replacement guide
VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.6 GTI, VW Lupo (6X1, 6E1) 1.4 FSI … View more
The steps may slightly vary depending on the car design.
How to change spark plug on VW LUPO 6x1 [TUTORIAL AUTODOC]


- The replacement procedure is the same for all spark plugs.
- Please note: all work on the car – VW Lupo 6X1 – should be done with the engine switched off.
- Step 1

Open the hood.
- Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
- Step 3

Detach the connector from the ignition coil.
- Step 4

Clean the ignition coil bolts. Use a wire brush. Use WD-40 spray.
- Step 5

Unscrew the ignition coil bolts. Use a drive socket #10. Use a ratchet wrench.
- Step 6

Remove the ignition coil.
- Step 7

Clean dirt, dust and debris from inside the spark plug wells.
- Step 8

Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 9

Take out the spark plugs.
- Step 10

Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 11

Install the new spark plugs into their mounting seats.
Find out which tyre and wheel sizes are compatible with the VW Lupo / Lupo 3L (6X1, 6E1) model
Popular maintenance tutorials for VW Lupo 6x1
Complete guides for changing the Engine spark plug on different VW LUPO models
Track expenses, manage logs, schedule replacements, and more.
Fluctuating RPMs? Check these 2 sensors
2 ways to clean the EGR valve – which one is better?
How to tell if a tie rod is faulty
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Most commonly replaced car parts on VW LUPO

























