How to change coolant flange on VW Lupo (6X1, 6E1) – replacement guide
VW Lupo (6X1, 6E1) 1.7 SDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Check the coolant condition and replace it if necessary.
- Inspect the thermostat. Replace it if necessary.
- All work should be done with the engine stopped.
- Step 1
Open the hood.
Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Unscrew the coolant reservoir cap.
- Step 4

Prepare a container for fluids.
- Step 5

Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench.
- Step 6

Detach the coolant hose.
Replacement: сoolant flange – VW LUPO (6X1, 6E1). Professionals recommend:Caution! Coolant may come out from the water pump channels and body.
- Step 7

Drain the coolant from the engine.
Replacement: сoolant flange – VW LUPO (6X1, 6E1). Tip from AUTODOC:Caution! The coolant can be very hot.Wear gloves to prevent contact with hot liquid.All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole.
- Step 8

Unscrew the thermostat housing fasteners. Use a drive socket #13. Use a ratchet wrench.
- Step 9

Remove the thermostat housing.
AUTODOC recommends:Replacement: сoolant flange – VW LUPO (6X1, 6E1). Do not use excessive force when removing the part as this may damage it.
- Step 10

Remove the thermostat.
Replacement: сoolant flange – VW LUPO (6X1, 6E1). AUTODOC experts recommend:Do not apply excessive force when removing the part. Otherwise you may damage it.Caution! Coolant may leak out of the coolant lines and thermostat housing.
- Step 11

Install the thermostat.
AUTODOC recommends:Caution! Do not use excessive force during installation. This may damage the fasteners of the car. VW LUPO (6X1, 6E1)
- Step 12

Install a new thermostat housing.
- Step 13

Tighten the thermostat housing fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 13 nm torque.
- Step 14

Attach the coolant hose.
Find out which tyre and wheel sizes are compatible with the VW Lupo / Lupo 3L (6X1, 6E1) model
Popular maintenance tutorials for VW Lupo 6x1
Complete guides for changing the Water outlet on different VW LUPO models
Track expenses, manage logs, schedule replacements, and more.
How to align the timing marks correctly on an EA888 engine
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
When, why, and how to change engine oil | AUTODOC tips
Top 10 most useful car life hacks
Most commonly replaced car parts on VW LUPO























