How to carry out replacement: Lambda Sensor 1.2 TDI 3L VW Lupo 6x1
Disclaimer
Change VW Lupo 6x1 1.2 TDI 3L Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on VW Lupo (6X1, 6E1) – replacement guide

downloads: 15
Views: 113
Download your free tutorial and fix VW Lupo (6X1, 6E1) 1.4 FSI problems yourself Download for free 890.88 KB Lambda Sensor for VW Lupo 6x1 Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your VW LUPO
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VW Lupo (6X1, 6E1) 1.0, VW Lupo (6X1, 6E1) 1.6 GTI, VW Lupo (6X1, 6E1) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Lupo (6X1, 6E1) and other VW models
How to change Lambda sensor on VW Lupo 6x1 1.2 TDI 3L – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Lupo / Lupo 3L (6X1, 6E1) – tips for proper car maintenance
Lambda sensor for Lupo / Lupo 3L (6X1, 6E1) Petrol (50 hp)
Simple DIY car repair steps – Replacing Lambda sensor on Lupo / Lupo 3L (6X1, 6E1)
Lambda sensor for Lupo / Lupo 3L (6X1, 6E1) Petrol (125 hp)
Easy tricks to help you to replace Lambda sensor on Lupo / Lupo 3L (6X1, 6E1)
Lambda sensor for Lupo / Lupo 3L (6X1, 6E1) Petrol (60 hp)
Tools
Replacement: lambda sensor – VW LUPO (6X1, 6E1). Tools you might need:
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – VW LUPO (6X1, 6E1). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VW LUPO (6X1, 6E1) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VW Lupo 6x1 1998 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 5
    How to replace VW Lupo (6X1, 6E1) 1.2 TDI 3L 1999 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 6
    VW Lupo 6x1 1.0 2000 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 7
    Changing Lambda Sensor on VW Lupo (6X1, 6E1) 1.4 16V 2001 by yourself
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  5. Step 8
    How to remove VW LUPO 1.4 TDI 2002 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 9
    How to replace Lambda Sensor on VW Lupo (6X1, 6E1) 2003: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  7. Step 10
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 11
    How hard is it to do yourself: Lambda Sensor replacement on VW Lupo 6x1 1.6 GTI 2004 - download illustrated guide
    Install the new oxygen sensor.
  8. Step 12
    Need to know how to renew Lambda Sensor on VW LUPO 2005? This free workshop manual will help you to do it yourself
    Tighten the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a torque wrench. Tighten it to 37 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Lupo / Lupo 3L (6X1, 6E1) model.

Browse tyres

Popular maintenance tutorials for VW Lupo 6x1

More manuals for VW Lupo 6x1

Complete guides for changing the Oxygen sensor on different VW LUPO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Lupo (6X1, 6E1) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Lupo (6X1, 6E1) Lambda Sensor replacement - online guide
Tips & tricks for your VW Lupo (6X1, 6E1)
View more
  • How to change Oxygen sensor on VW Lupo (6X1, 6E1) 1.4 - replacement tricks
    How to remove scratches from car plastic | AUTODOC tips
    100K views
    Published on: 15/12/2022
  • Changing O2 sensor VW Lupo 6x1 1.2 TDI 3L - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
    8K views
    Published on: 15/06/2023
  • Maintenance Hacks - VW Lupo (6X1, 6E1) 1.0 NOx sensor replacement guide
    How to remove rust | AUTODOC tips
    25K views
    Published on: 16/09/2021
  • Replace Lambda sensors on VW Lupo 6x1 - free video tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
    9K views
    Published on: 13/07/2023

Most commonly replaced car parts on VW LUPO

Professional manuals for the most common VW models