Recommended replacement interval for the part category Spark plug : 90000 km

Important!

This replacement procedure can be used for:
TOYOTA Urban Cruiser (_P1_) 1.33 (NSP110_), TOYOTA Urban Cruiser (_P1_) 1.33 (NSP110_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Spark Plug for Urban Cruiser (_P1_) and other TOYOTA models

Spark plug

Spark plug for Urban Cruiser (XP110) Petrol (99 hp)

Simple DIY car repair steps – Replacing Spark plug on Urban Cruiser (XP110)

Spark plug for Urban Cruiser (XP110) Petrol (101 hp)

Replacement: spark plugs – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_). Tools you'll need:

                        Electronic spray
                      
                        High-temperature anti-seize lubricant
                      
                        Drive socket # 10 
                      
                        Spark plug socket # 16
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Fender cover

Buy tools

Replacement: spark plugs – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_). Professionals recommend:

The replacement procedure is the same for all spark plugs.
Please note: all work on the car – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Remove the engine cover.
Step 4

Unplug the connectors from the ignition coils.
Step 5

Clean the ignition coils.
Step 6

Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
Step 7

Take out the ignition coils from the spark plug wells.

Replacement: spark plugs – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_). AUTODOC recommends:
Remember the sequence of steps for ignition coil demounting.
Step 8

Clean dirt, dust and debris from inside the spark plug wells.

Step 9

Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
Step 10

Take out the spark plugs.
Step 11

Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
Step 12

Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
Step 13

Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 20 nm torque.

Replacement: spark plugs – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_). AUTODOC experts recommend:
Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 14

Treat the ignition coil tips. Use high-temperature grease.

Step 15

Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.

AUTODOC recommends:
Replacement: spark plugs – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_). Follow the installation steps.
Step 16

Tighten the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
Step 17

Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
Step 18

Plug in the connectors of the ignition coils.
Step 19

Install the engine cover and secure it.

AUTODOC recommends:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.Replacement: spark plugs – TOYOTA URBAN CRUISER (NSP1_, NLP1_, ZSP1_, NCP11_). Do not use excessive force during installation. This may damage the fasteners.
Step 20

Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.

Step 21

Shut off the engine.

Step 22

Remove the fender protection cover.

Step 23

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Urban Cruiser (XP110) model.

Toyota Urban Cruiser XP11 tyre size

How to change lambda sensor on TOYOTA Urban Cruiser (XP110) – replacement guide

Free download PDF
1.37 MB
How to change front brake pads on TOYOTA Urban Cruiser (_P1_) – replacement guide

Free download PDF
1.56 MB
How to change rear brake pads on TOYOTA Urban Cruiser (_P1_) – replacement guide

Free download PDF
1.41 MB
How to change front wheel bearing on TOYOTA Urban Cruiser (XP110) – replacement guide

Free download PDF
3.91 MB
How to change front wheel bearing on TOYOTA Urban Cruiser (_P1_) – replacement guide

Free download PDF
3.7 MB
How to change engine oil and filter on TOYOTA Urban Cruiser (_P1_) – replacement guide

Free download PDF
1.1 MB

How to change spark plugs on a car – replacement tutorial

Universal

Free download PDF
1.74 MB
How to change spark plugs on Toyota Auris E15 – replacement guide

Free download PDF
1.31 MB
How to change spark plugs on Toyota Yaris Mk2 – replacement guide

Free download PDF
2.29 MB
How to change spark plugs on Toyota Aygo AB1 – replacement guide

Free download PDF
2.11 MB
How to change spark plugs on Toyota Yaris P1 – replacement guide

Free download PDF
1.2 MB
How to change spark plugs on Toyota RAV4 III – replacement guide

Free download PDF
1.74 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to clean an engine bay | AUTODOC

6K views

Published on: 11/09/2020
How to restore a steering wheel | AUTODOC tips

32K views

Published on: 17/02/2022
How to restore a damaged thread | AUTODOC tips

5K views

Published on: 04/05/2023
8 bad driving habits | AUTODOC tips

4K views

Published on: 01/04/2021