Disclaimer
How to change spark plugs on FIAT BRAVO II (198) – replacement guide
downloads:
11
Views:
201
Recommended replacement interval for the part category Spark plug : 2 year / 30000 km
Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.4 (198AXA1B), FIAT BRAVO II (198) 1.4 LPG (198AXA1B) … View more
The steps may slightly vary depending on the car design.
FIAT BRAVO II (198) 1.4 (198AXA1B), FIAT BRAVO II (198) 1.4 LPG (198AXA1B) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for BRAVO II (198) and other FIAT models
Alternative products
Spark plug
High-temperature anti-seize lubricant
Torque wrench
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Pincers
Microfibre towel
Fender cover
Replacement: spark plugs – FIAT BRAVO II (198). AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – FIAT BRAVO II (198). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the air intake pipe from the air filter housing. - Step 4
Undo the fastening screws of the air filter cover. Use a drive socket #10. Use a ratchet wrench. - Step 5
Release the air filter cover clips. - Step 6
Remove the air filter housing. - Step 7
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 8
Remove the spark plug wire connectors from the spark plug wells. Use pincers.Replacement: spark plugs – FIAT BRAVO II (198). AUTODOC experts recommend:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors. - Step 9
Clean dirt, dust and debris from inside the spark plug wells. - Step 10
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 11
Take out the spark plugs. - Step 12
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 13
Install the new spark plugs into their mounting seats. Use the spark plug socket #16. - Step 14
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – FIAT BRAVO II (198). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Bravo II Hatchback (198) model
Popular maintenance tutorials for FIAT BRAVO II (198)
Free download PDF
1.93 MB
Free download PDF1.7 MB
Free download PDF2.48 MB
Free download PDF2.29 MB
Free download PDF2.49 MB
Free download PDF1.43 MB
Complete guides for changing the Engine spark plug on different FIAT BRAVO models
Free download PDF1.46 MB
Free download PDF1.74 MB
Free download PDF1.59 MB
Free download PDF1.83 MB
Free download PDF1.37 MB
Free download PDF1.37 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT BRAVO II (198)
View more
Top 5 possible reasons your car is shaking or vibrating
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
When, why, and how to change engine oil | AUTODOC tips
Initial Car Inspection: What to Check Before You Buy
Most commonly replaced car parts on FIAT BRAVO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME