Disclaimer
How to change spark plugs on Fiat Punto 188 – replacement guide
downloads:
19
Views:
567
Recommended replacement interval for the part category Spark plug : 40000 km
Important!
This replacement procedure can be used for:
FIAT PUNTO (188) 1.4 … View more
The steps may slightly vary depending on the car design.
FIAT PUNTO (188) 1.4 … View more
The steps may slightly vary depending on the car design.
How to change spark plug on FIAT PUNTO 2 (188) [TUTORIAL AUTODOC]
All the parts you need to replace – Spark Plug for PUNTO (188) and other FIAT models
Spark plug
Alternative products
Spark plug
High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 16
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Flat Screwdriver
Microfibre towel
Fender cover
Replacement: spark plugs – Fiat Punto 188. Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – Fiat Punto 188. Take the following steps:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Unscrew the filter housing fastening bolts. Use a drive socket #10. Use a ratchet wrench. - Step 4
Remove the air filter housing retaining spring. - Step 5
Remove the air filter housing. - Step 6
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 7
Detach the crankcase ventilation hose from the engine cover at the left. Use a crowbar. - Step 8
Detach the throttle valve connectors. Use a crowbar. - Step 9
Remove the spark plug wire connectors from the spark plug wells.Replacement: spark plugs – Fiat Punto 188. AUTODOC recommends:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors. - Step 10
Clean dirt, dust and debris from inside the spark plug wells. - Step 11
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 12
Take out the spark plugs. Use the spark plug socket #16. - Step 13
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 14
Install the new spark plugs into their mounting seats. Use the spark plug socket #16. - Step 15
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 27 nm torque.Replacement: spark plugs – Fiat Punto 188. Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection. - Step 16
Treat the spark plug wire connectors. Use high-temperature grease. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Punto II Hatchback (188) model
Popular maintenance tutorials for Fiat Punto Mk2
Free download PDF
1.61 MB
Free download PDF2.07 MB
Free download PDF1.93 MB
Free download PDF2.05 MB
Free download PDF1.47 MB
Free download PDF1.33 MB
Complete guides for changing the Engine spark plug on different FIAT PUNTO models
Free download PDF1.37 MB
Free download PDF1.37 MB
Free download PDF1.46 MB
Free download PDF1.46 MB
Free download PDF1.74 MB
Free download PDF1.59 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT PUNTO (188)
View more
5 causes of turbocharger failure and how to avoid them
3 essential tips for choosing summer tyres | Get ready for warmer weather
DIY brake caliper restoration | AUTODOC tips
#TPMS Explained: Why Your Light is On and How to Respond Safely
Most commonly replaced car parts on FIAT PUNTO
Time to replace parts? Get even better deals in our Shop app.
SCAN ME