When to replace the Spark Plug on your FIAT BRAVA
Recommended replacement interval for the part category Spark plug : 40000 km
Important!
This replacement procedure can be used for:
FIAT BRAVO I (182) 1.4 (182.AG), FIAT BRAVO I (182) 1.6 16V (182.AB), FIAT BRAVO I (182) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: spark plugs – FIAT BRAVO I (182). List of the tools you'll need:
High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 16
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Flat Screwdriver
Microfibre towel
Fender cover
Replacement: spark plugs – FIAT BRAVO I (182). Tip from AUTODOC:
  • The replacement procedure is the same for all spark plugs.
  • All work should be done with the engine stopped.
Replacement: spark plugs – FIAT BRAVO I (182). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Spark Plug on Fiat Bravo 182 1995 - free PDF and video manuals
    Unscrew the filter housing fastening bolts. Use a drive socket #10. Use a ratchet wrench.
  2. Step 4
    How to replace FIAT BRAVO I (182) 1.9 JTD 105 1996 Spark Plug - step-by-step manuals and video guides
    Remove the air filter housing retaining spring.
  3. Step 5
    Fiat Bravo 182 1.6 16V 1997 Spark Plug replacement: free workshop manuals
    Remove the air filter housing.
  4. Step 6
    Changing Spark Plug on FIAT BRAVO I (182) 1.4 1998 by yourself
    Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
  5. Step 7
    How to remove FIAT BRAVA 1.9 JTD 1999 Spark Plug - online easy-to-follow instructions
    Detach the crankcase ventilation hose from the engine cover at the left. Use a crowbar.
  6. Step 8
    How to replace Spark Plug on FIAT BRAVO I (182) 2000: download PDF manuals and video instructions
    Detach the throttle valve connectors. Use a crowbar.
  7. Step 9
    How hard is it to do yourself: Spark Plug replacement on Fiat Bravo 182 2.0 HGT 20V 2001 - download illustrated guide
    Remove the spark plug wire connectors from the spark plug wells.
    Replacement: spark plugs – FIAT BRAVO I (182). AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
  8. Step 10
    Need to know how to renew Spark Plug on FIAT BRAVA 1995? This free workshop manual will help you to do it yourself
    Clean dirt, dust and debris from inside the spark plug wells.
  9. Step 11
    Changing of Spark Plug on Fiat Bravo 182 1996 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
  10. Step 12
    FIAT BRAVA 1.6 Spark Plug replacement: online guides and video tutorials
    Take out the spark plugs. Use the spark plug socket #16.
  11. Step 13
    Replacing Spark Plug on Fiat Bravo 182 1998 1.9 JTD 105 by yourself
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
  12. Step 14
    BRAVO I (182) 1.9 JTD 1999 Spark Plug DIY replacement workshop manual
    Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
  13. Step 15
    How to change Spark Plug on FIAT BRAVO I (182) 2000 - tips and tricks
    Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 27 nm torque.
    Replacement: spark plugs – FIAT BRAVO I (182). Professionals recommend:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
  14. Step 16
    Step-by-step recommendations for DIY replacement Fiat Bravo 182 2001 1.9 JTD Spark Plug
    Treat the spark plug wire connectors. Use high-temperature grease. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Bravo I Hatchback (182) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT BRAVO I (182) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT BRAVO I (182) Spark Plug replacement - online guide
Tips & tricks for your FIAT BRAVO I (182)
View more
  • How to change Engine spark plug on FIAT BRAVO I (182) 1.2 16V 80 - replacement tricks
    5 mistakes made when washing the engine | AUTODOC tips
  • Changing Spark plug Fiat Bravo 182 1.9 JTD 105 - Replacement Tips
    Petrol or diesel? What's the difference between these engines? | AUTODOC
  • Maintenance Hacks - FIAT BRAVO I (182) 1.6 16V Engine spark plugs replacement guide
    5 car interior cleaning mistakes | AUTODOC tips
  • Replace Spark plug set on Fiat Bravo 182 - free video tips
    How to shine your tyres | AUTODOC tips