When to replace the Spark Plug on your FIAT PANDA
Recommended replacement interval for the part category Spark plug : 40000 km
Important!
This replacement procedure can be used for:
FIAT PANDA (169) 1.2 4x4 (169.AXB2A), FIAT PANDA (169) 1.2 Natural Power (169.AXB1A), FIAT PANDA (169) 1.2 (169AXF2A, 169AXF1A), FIAT PANDA (169) 1.4 Natural Power (169AXHIA), FIAT PANDA (169) 1.2 4x4 (169AXF2A, 169AXF1A), FIAT PANDA (169) 1.1 (169.AXA1A), FIAT PANDA (169) 1.4 (169AXE1B), FIAT PANDA (169) 1.2 LPG (169.AXB1A) View more

The steps may slightly vary depending on the car design.

How to change spark plug on FIAT PANDA 2 (169) [TUTORIAL AUTODOC]

video
Tools
Replacement: spark plugs – Fiat Panda 169. Tools you need:
High-temperature anti-seize lubricant
Torque wrench
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Pincers
Microfibre towel
Fender cover
Replacement: spark plugs – Fiat Panda 169. AUTODOC recommends:
  • The replacement procedure is the same for all spark plugs.
  • All work should be done with the engine stopped.
Replacement: spark plugs – Fiat Panda 169. Recommended sequence of steps:
  1. Step 1
    How to change Spark Plug on Fiat Panda Mk2 2003 - free PDF and video manuals
    Open the hood.
  2. Step 2
    How to replace FIAT PANDA (169) 1.2 (169.AXB11, 169.AXB1A) 2004 Spark Plug - step-by-step manuals and video guides
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  3. Step 3
    Fiat Panda Mk2 1.1 (169.AXA1A) 2005 Spark Plug replacement: free workshop manuals
    Disconnect the air intake pipe from the air filter housing.
  4. Step 4
    Changing Spark Plug on FIAT PANDA (169) 1.2 Natural Power (169.AXB1A) 2006 by yourself
    Undo the fastening screws of the air filter cover. Use a drive socket #10. Use a ratchet wrench.
  5. Step 5
    How to remove FIAT PANDA 1.3 D Multijet 4x4 (169.AXC2A) 2007 Spark Plug - online easy-to-follow instructions
    Release the air filter cover clips.
  6. Step 6
    How to replace Spark Plug on FIAT PANDA (169) 2008: download PDF manuals and video instructions
    Remove the air filter housing.
  7. Step 7
    How hard is it to do yourself: Spark Plug replacement on Fiat Panda Mk2 1.3 D Multijet (169.AXC1A) 2009 - download illustrated guide
    Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
  8. Step 8
    Need to know how to renew Spark Plug on FIAT PANDA 2010? This free workshop manual will help you to do it yourself
    Remove the spark plug wire connectors from the spark plug wells. Use pincers.
    Replacement: spark plugs – Fiat Panda 169. AUTODOC experts recommend:
    Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
  9. Step 9
    Changing of Spark Plug on Fiat Panda Mk2 2011 won't be an issue if you follow this illustrated step-by-step guide
    Clean dirt, dust and debris from inside the spark plug wells.
  10. Step 10
    FIAT PANDA 1.4 Natural Power (169AXHIA) Spark Plug replacement: online guides and video tutorials
    Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
  11. Step 11
    Replacing Spark Plug on Fiat Panda Mk2 2013 1.2 (169.AXB11, 169.AXB1A) by yourself
    Take out the spark plugs.
  12. Step 12
    PANDA (169) 1.3 D Multijet 4x4 (169.AXC2A) 2014 Spark Plug DIY replacement workshop manual
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
  13. Step 13
    How to change Spark Plug on FIAT PANDA (169) 2015 - tips and tricks
    Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
  14. Step 14
    Step-by-step recommendations for DIY replacement Fiat Panda Mk2 2016 1.3 D Multijet 4x4 (169.AXC2A) Spark Plug
    Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.
    Replacement: spark plugs – Fiat Panda 169. AUTODOC recommends:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Panda II Hatchback (169) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT PANDA (169) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY FIAT PANDA (169) Spark Plug replacement - online guide
Tips & tricks for your FIAT PANDA (169)
View more
  • How to change Engine spark plug on FIAT PANDA (169) 1.2 (169AXF2A, 169AXF1A) - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Spark plug Fiat Panda Mk2 1.2 (169.AXB11, 169.AXB1A) - Replacement Tips
    How to paint a brake caliper | AUTODOC tips
  • Maintenance Hacks - FIAT PANDA (169) 1.1 (169.AXA1A) Engine spark plugs replacement guide
    How to replace a wheel stud | AUTODOC tips
  • Replace Spark plug set on Fiat Panda Mk2 - free video tips
    DIY brake caliper restoration | AUTODOC tips