How to change rear brake pads on Audi A4 B6 Avant – replacement guide
AUDI A4 Avant (8E5, B6) 1.6, AUDI A4 Avant (8E5, B6) 2.0, AUDI A4 Avant (8E5, B6) 1.8 T, AUDI A4 Avant (8E5, B6) 3.0, AUDI A4 Avant (8E5, B6) 1.9 TDI, AUDI A4 Avant (8E5, B6) 2.4, AUDI A4 Avant (8E5, B6) 2.5 TDI quattro, AUDI A4 Avant (8E5, B6) 2.5 TDI, AUDI A4 Avant (8E5, B6) 1.8 T quattro, AUDI A4 Avant (8E5, B6) 3.0 quattro, AUDI A4 Avant (8E5, B6) 1.9 TDI quattro, AUDI A4 Avant (8E5, B6) 2.0 FSI, AUDI A4 Avant (8E5, B6) 1.8 T, AUDI A4 Avant (8E5, B6) 1.8 T quattro, AUDI A4 Avant (8E5, B6) 2.5 TDI, AUDI A4 Avant (8E5, B6) 2.4, AUDI A4 Avant (8E5, B6) 1.8 T, AUDI A4 Avant (8E5, B6) 1.8 T quattro, AUDI A4 Avant (8E5, B6) 1.9 TDI, AUDI A4 Avant (8E5, B6) 3.0, AUDI A4 Avant (8E5, B6) 3.0 quattro … View more
The steps may slightly vary depending on the car design.
How to change rear brake pads / rear brake pad set on AUDI A4 B6 (8E5) [TUTORIAL AUTODOC]


- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- All work should be done with the engine stopped.
- Step 1

Open the bonnet.
- Step 2

Unscrew the brake fluid reservoir cap.
- Step 3

Secure the wheels with chocks.
- Step 4

Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5

Raise the rear of the car and secure on supports.
- Step 6

Unscrew the wheel bolts.
Replacement: brake pads – Audi A4 B6 Avant. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 7

Remove the wheel.
- Step 8

Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
- Step 9

Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #15.
- Step 10

Remove the brake caliper. Use a crowbar.
Replacement: brake pads – Audi A4 B6 Avant. Tip:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 11

Remove the brake pads. Use a crowbar.
Replacement: brake pads – Audi A4 B6 Avant. Tip from AUTODOC:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
- Step 12

Treat the brake caliper piston. Use a brake cleaner.
AUTODOC recommends:Replacement: brake pads – Audi A4 B6 Avant. After applying the spray, wait a few minutes.
- Step 13

Press in the brake caliper piston. Use brake caliper wind back tool.
- Step 14

Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
Replacement: brake pads – Audi A4 B6 Avant. Professionals recommend:After applying the spray, wait a few minutes.
Find out which tyre and wheel sizes are compatible with the AUDI A4 B6 Avant (8E5) model
Popular maintenance tutorials for Audi A4 B6 Avant
Complete guides for changing the Brake pad set on different AUDI A4 models
Track expenses, manage logs, schedule replacements, and more.
What diagnoses your car?
The most common problems when buying a used car | AUTODOC
How to restore a steering wheel | AUTODOC tips
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Most commonly replaced car parts on AUDI A4


































