Replacement: ignition coil – Ford Mondeo Mk3 saloon. Tip from AUTODOC experts:
The replacement procedure is the same for the ignition coils of all cylinders.
All work should be done with the engine stopped.
Replacement: ignition coil – Ford Mondeo Mk3 saloon. Take the following steps:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Remove the engine cover.
AUTODOC recommends:
Replacement: ignition coil – Ford Mondeo Mk3 saloon. Do not use excessive force when removing the part as this may damage it.
Step 4
Detach the connector from the ignition coil.
Step 5
Make marks to indicate the order of installation of the spark plug wires.
Step 6
Disconnect the spark plug wires from the ignition coil.
Replacement: ignition coil – Ford Mondeo Mk3 saloon. Professionals recommend:
Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
Step 7
Unscrew the ignition coil bracket. Use Torx T20. Use a ratchet wrench.
Step 8
Remove the ignition coil.
Step 9
Install a new ignition coil.
Step 10
Tighten the ignition coil fastening. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Step 11
Treat the ignition coil connector with electronic spray.
Step 12
Plug in the ignition coil connector.
Step 13
Connect the spark plug wires to the ignition coil.
AUTODOC recommends:
Follow the installation sequence.
Step 14
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 15
Shut off the engine.
Step 16
Install the engine cover and secure it.
Replacement: ignition coil – Ford Mondeo Mk3 saloon. Tip from AUTODOC:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners.When installing, do not use excessive force to avoid damage to the part.
Step 17
Remove the fender protection cover.
Step 18
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Saloon (B4Y) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD MONDEO III Saloon (B4Y)
View more
NRF is a leading supplier of automotive parts in AUTODOC
Petrol or diesel: The engine showdown! | AUTODOC
Coolant comparison test | AUTODOC
The most common problems when buying a used car | AUTODOC