Important!
This replacement procedure can be used for:
FORD MONDEO IV (BA7) 1.6 Ti, FORD MONDEO IV (BA7) 1.6 Ti, FORD MONDEO IV (BA7) 1.6 Ti View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: ignition coil – FORD MONDEO IV (BA7). Tools you might need:
Electronic spray
Torque wrench
Torx bit T20
Ratchet wrench
Fender cover
Replacement: ignition coil – FORD MONDEO IV (BA7). Tip from AUTODOC experts:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – FORD MONDEO IV (BA7). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Ford Mondeo Mk4 Facelift 2007 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – FORD MONDEO IV (BA7). Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace FORD MONDEO IV (BA7) 2.0 TDCi 2008 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Ford Mondeo Mk4 Facelift 1.8 TDCi 2009 Ignition Coil replacement: free workshop manuals
    Make marks to indicate the order of installation of the spark plug wires.
  4. Step 6
    Changing Ignition Coil on FORD MONDEO IV (BA7) 1.6 TDCi 2010 by yourself
    Disconnect the spark plug wires from the ignition coil.
    AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
  5. Step 7
    How to remove FORD MONDEO 2.2 TDCi 2011 Ignition Coil - online easy-to-follow instructions
    Unscrew the ignition coil bracket. Use Torx T20. Use a ratchet wrench.
  6. Step 8
    How to replace Ignition Coil on FORD MONDEO IV (BA7) 2012: download PDF manuals and video instructions
    Remove the ignition coil.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on Ford Mondeo Mk4 Facelift 2.0 TDCi 2013 - download illustrated guide
    Install a new ignition coil.
  8. Step 10
    Need to know how to renew Ignition Coil on FORD MONDEO 2014? This free workshop manual will help you to do it yourself
    Tighten the ignition coil fastening. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk4 Hatchback (BA7) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD MONDEO IV (BA7) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD MONDEO IV (BA7) Ignition Coil replacement - online guide
Tips & tricks for your FORD MONDEO IV (BA7)
View more
  • How to change Coil pack on FORD MONDEO IV (BA7) 2.0 - replacement tricks
    How to find and change a fuse | AUTODOC
  • Changing Ignition coil pack Ford Mondeo Mk4 Facelift 2.0 TDCi - Replacement Tips
    How to replace a wheel stud | AUTODOC tips
  • Maintenance Hacks - FORD MONDEO IV (BA7) 1.8 TDCi Ignition coils replacement guide
    5 most common causes of oil leaks | AUTODOC tips
  • Replace Coil packs on Ford Mondeo Mk4 Facelift - free video tips
    How to repair a chipped or cracked windscreen | AUTODOC tips