Important!
This replacement procedure can be used for:
FORD MONDEO III (B5Y) 2.0 16V, FORD MONDEO III (B5Y) 1.8 16V, FORD MONDEO III (B5Y) 1.8 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for MONDEO III (B5Y) and other FORD models
Alternative products
How to change Ignition coil on Ford Mondeo Mk3 2.0 16V TDDi / TDCi – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – FORD MONDEO III (B5Y). Tools you might need:
Electronic spray
Torque wrench
Torx bit T20
Ratchet wrench
Fender cover
Replacement: ignition coil – FORD MONDEO III (B5Y). Tip from AUTODOC experts:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – FORD MONDEO III (B5Y). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Ford Mondeo Mk3 2000 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – FORD MONDEO III (B5Y). Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace FORD MONDEO III (B5Y) 2.0 16V TDDi / TDCi 2001 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Ford Mondeo Mk3 2.0 TDCi 2002 Ignition Coil replacement: free workshop manuals
    Make marks to indicate the order of installation of the spark plug wires.
  4. Step 6
    Changing Ignition Coil on FORD MONDEO III (B5Y) 1.8 16V 2003 by yourself
    Disconnect the spark plug wires from the ignition coil.
    AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
  5. Step 7
    How to remove FORD MONDEO 2.2 TDCi 2004 Ignition Coil - online easy-to-follow instructions
    Unscrew the ignition coil bracket. Use Torx T20. Use a ratchet wrench.
  6. Step 8
    How to replace Ignition Coil on FORD MONDEO III (B5Y) 2005: download PDF manuals and video instructions
    Remove the ignition coil.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on Ford Mondeo Mk3 ST220 3.0 2006 - download illustrated guide
    Install a new ignition coil.
  8. Step 10
    Need to know how to renew Ignition Coil on FORD MONDEO 2007? This free workshop manual will help you to do it yourself
    Tighten the ignition coil fastening. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Mondeo Mk3 Hatchback (B5Y) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD MONDEO III (B5Y) Ignition Coil replacement - online guide
Tips & tricks for your FORD MONDEO III (B5Y)
View more
  • How to change Coil pack on FORD MONDEO III (B5Y) 2.0 16V - replacement tricks
    Checking the starter without removing it | AUTODOC tips
  • Changing Ignition coil pack Ford Mondeo Mk3 2.0 16V TDDi / TDCi - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Maintenance Hacks - FORD MONDEO III (B5Y) 2.0 TDCi Ignition coils replacement guide
    5 mistakes made when washing the engine | AUTODOC tips
  • Replace Coil packs on Ford Mondeo Mk3 - free video tips
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD MONDEO III (B5Y) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME