Disclaimer
How to change fuel filter on FORD S-MAX (WA6) – replacement guide
downloads:
53
Views:
1237
Recommended replacement interval for the part category Fuel filter : 3 year / 60000 km
Important!
This replacement procedure can be used for:
FORD S-MAX (WA6) 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
FORD S-MAX (WA6) 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for S-MAX (WA6) and other FORD models
Alternative products

All-purpose cleaning spray
Drive socket # 8
Torx bit T15
Ratchet wrench
Torque wrench
Bleeder kit
Flat Screwdriver
Fender cover
Replacement: fuel filter – FORD S-MAX (WA6). AUTODOC experts recommend:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- All work should be done with the engine stopped.
Replacement: fuel filter – FORD S-MAX (WA6). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.Replacement: fuel filter – FORD S-MAX (WA6). Tip from AUTODOC:Raise the engine cover, holding it on two sides simultaneously.Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 4
Unscrew the fuel filter bracket fixing bolts. Use a drive socket #8. Use a ratchet wrench. - Step 5
Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray. - Step 6
Detach the fuel pressure sensor connector. - Step 7
Squeeze the clips and detach the fuel supply lines from the fuel filter housing. Use a flat screwdriver.AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses. - Step 8
Detach the fuel pressure sensor connector. - Step 9
Loosen the fuel filter mounting. Use a drive socket #8. Use a ratchet wrench. - Step 10
Remove the fuel filter. - Step 11
Clean the fuel filter. Use all-purpose cleaning spray. - Step 12
Unscrew the fasteners of the fuel filter housing cover. Use Torx T15. Use a ratchet wrench. - Step 13
Remove the fuel filter housing cover. - Step 14
Clean the fuel filter housing and the cover. Use all-purpose cleaning spray. - Step 15
Install and tighten the cap of the fuel filter housing. Use Torx T15. Use a ratchet wrench. - Step 16
Install a new fuel filter.Replacement: fuel filter – FORD S-MAX (WA6). AUTODOC experts recommend:Take care to only use quality filters. - Step 17
Screw in the fuel filter mounting bracket. Use a drive socket #8. Use a ratchet wrench. - Step 18
Attach the fuel pressure sensor connector. - Step 19
Connect the fuel lines to the fuel filter and lock the fastening clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD S-Max Mk1 (WA6) model
Popular maintenance tutorials for Ford S-Max Mk1
Complete guides for changing the Fuel filters on different FORD S-MAX models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD S-MAX (WA6)
View more
Engine Overheating? Replace Your Cooling Fan to Fix It
7 signs of faulty fuel injectors | AUTODOC tips
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on FORD S-MAX
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























