Disclaimer
How to change fuel filter on FORD KA+ Hatchback (UK, FK) – replacement guide
downloads:
17
Views:
315
Recommended replacement interval for the part category Fuel filter : 4 year / 60000 km
Important!
This replacement procedure can be used for:
FORD KA+ Hatchback (UK, FK) 1.5 TDCi … View more
The steps may slightly vary depending on the car design.
FORD KA+ Hatchback (UK, FK) 1.5 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for KA+ Hatchback (UK, FK) and other FORD models
Alternative products

All-purpose cleaning spray
Drive socket # 8
Torx bit T15
Ratchet wrench
Torque wrench
Bleeder kit
Flat Screwdriver
Fender cover
Replacement: fuel filter – FORD KA. AUTODOC experts recommend:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- All work should be done with the engine stopped.
Replacement: fuel filter – FORD KA. Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.Replacement: fuel filter – FORD KA. Tip from AUTODOC:Raise the engine cover, holding it on two sides simultaneously.Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 4
Unscrew the fuel filter bracket fixing bolts. Use a drive socket #8. Use a ratchet wrench. - Step 5
Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray. - Step 6
Detach the fuel pressure sensor connector. - Step 7
Squeeze the clips and detach the fuel supply lines from the fuel filter housing. Use a flat screwdriver.AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses. - Step 8
Detach the fuel pressure sensor connector. - Step 9
Loosen the fuel filter mounting. Use a drive socket #8. Use a ratchet wrench. - Step 10
Remove the fuel filter. - Step 11
Clean the fuel filter. Use all-purpose cleaning spray. - Step 12
Unscrew the fasteners of the fuel filter housing cover. Use Torx T15. Use a ratchet wrench. - Step 13
Remove the fuel filter housing cover. - Step 14
Clean the fuel filter housing and the cover. Use all-purpose cleaning spray. - Step 15
Install and tighten the cap of the fuel filter housing. Use Torx T15. Use a ratchet wrench. - Step 16
Install a new fuel filter.Replacement: fuel filter – FORD KA. AUTODOC experts recommend:Take care to only use quality filters. - Step 17
Screw in the fuel filter mounting bracket. Use a drive socket #8. Use a ratchet wrench. - Step 18
Attach the fuel pressure sensor connector. - Step 19
Connect the fuel lines to the fuel filter and lock the fastening clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD KA+ Hatchback (UK, FK) model
Popular maintenance tutorials for FORD KA
Complete guides for changing the Fuel filters on different FORD KA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD KA+ Hatchback (UK, FK)
View more
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
Coolant comparison test | AUTODOC
5 mistakes when replacing consumables
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Most commonly replaced car parts on FORD KA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























