When to replace the Poly V-Belt on your FORD KA
Recommended replacement interval for the part category Serpentine belt : 10 year / 240000 km
Important!
This replacement procedure can be used for:
FORD KA+ Hatchback (UK, FK) 1.5 TDCi, FORD KA+ Hatchback (UK, FK) 1.5 TDCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for KA+ Hatchback (UK, FK) and other FORD models
Alternative products
How to change Serpentine belt on FORD KA 1.2 Ti-VCT – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – FORD KA. Tools you'll need:
Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – FORD KA. AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – FORD KA. Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on FORD KA 2014 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench.
  2. Step 5
    How to replace FORD KA+ Hatchback (UK, FK) 1.2 Ti-VCT 2015 Poly V-Belt - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 6
    FORD KA 1.2 2016 Poly V-Belt replacement: free workshop manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
  4. Step 7
    Changing Poly V-Belt on FORD KA+ Hatchback (UK, FK) 1.0 Flexfuel 2017 by yourself
    Remove the V-ribbed belt.
  5. Step 8
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – FORD KA. Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 9
    How to remove FORD KA 1.5 Flexfuel 2018 Poly V-Belt - online easy-to-follow instructions
    Install the V-ribbed belt.
    Replacement: serpentine belt – FORD KA. AUTODOC experts recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  6. Step 10
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.
    Step 11
    How to replace Poly V-Belt on FORD KA+ Hatchback (UK, FK) 2019: download PDF manuals and video instructions
    Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD KA+ Hatchback (UK, FK) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD KA+ Hatchback (UK, FK) Poly V-Belt replacement - online guide
Tips & tricks for your FORD KA+ Hatchback (UK, FK)
View more
  • How to change Alternator belt on FORD KA+ Hatchback (UK, FK) 1.5 TDCi - replacement tricks
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
  • Changing Auxiliary belt FORD KA 1.2 Ti-VCT - Replacement Tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
  • Maintenance Hacks - FORD KA+ Hatchback (UK, FK) 1.2 Poly V-belt replacement guide
    #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
  • Replace Drive belt on FORD KA - free video tips
    7 signs of faulty fuel injectors | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD KA+ Hatchback (UK, FK) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME