How to change front windshield wipers on Fiat Bravo 2 – replacement guide
downloads:
1
Views:
112
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.6 D Multijet (198AXH1B),
FIAT BRAVO II (198) 1.4 16V (198AXS1B),
FIAT BRAVO II (198) 1.6 D Multijet (198AXM1B),
FIAT BRAVO II (198) 1.9 D Multijet (198AXD1A),
FIAT BRAVO II (198) 1.4 LPG (198AXA1B),
FIAT BRAVO II (198) 2.0 D Multijet (198AXPIB),
FIAT BRAVO II (198) 1.9 D Multijet (198AXB1A),
FIAT BRAVO II (198) 1.9 D Multijet (198AXC1B),
FIAT BRAVO II (198) 1.4 (198AXA1B),
FIAT BRAVO II (198) 1.4 T-Jet (198AXG1B),
FIAT BRAVO II (198) 1.4 T-Jet (198AXF1B),
FIAT BRAVO II (198) 1.6 D Multijet (198AXL1B),
FIAT BRAVO II (198) 1.9 D Multijet (198AXE1A),
FIAT BRAVO II (198) 2.0 D Multijet (198AXN1B)
…
View more
The steps may slightly vary depending on the car design.
How to change wipers blades / window wipers FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]
All the parts you need to replace – Wiper Blades for BRAVO II (198) and other FIAT models
Replacement: windshield wipers – Fiat Bravo 2. Tip:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
All work should be done with the engine stopped.
Replacement: windshield wipers – Fiat Bravo 2. Use the following procedure:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip. Use a flat screwdriver.
Step 4
Remove the blade from the wiper arm.
Replacement: windshield wipers – Fiat Bravo 2. AUTODOC experts recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – Fiat Bravo 2. Tip from AUTODOC:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Bravo II Hatchback (198) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FIAT BRAVO II (198)
View more
3 things to know before buying summer tyres | AUTODOC tips
How and why to check your oil | AUTODOC tips
How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
How to remove scratches from car plastic | AUTODOC tips