How to change front windshield wipers on Fiat Panda 169 – replacement guide
downloads:
3
Views:
53
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
FIAT PANDA (169) 1.2 (169AXF2A, 169AXF1A),
FIAT PANDA (169) 1.4 Natural Power (169AXHIA),
FIAT PANDA (169) 1.3 JTD Multijet 4x4 (169AXG1A, 169AXG2A),
FIAT PANDA (169) 1.2 4x4 (169AXF2A, 169AXF1A),
FIAT PANDA (169) 1.2 LPG (169CXF1A),
FIAT PANDA (169) 1.1 (169.AXA1A),
FIAT PANDA (169) 1.2 (169.AXB11, 169.AXB1A),
FIAT PANDA (169) 1.3 D Multijet (169.AXC1A),
FIAT PANDA (169) 1.3 D Multijet 4x4 (169.AXC2A),
FIAT PANDA (169) 1.2 4x4 (169.AXB2A),
FIAT PANDA (169) 1.4 (169AXE1B),
FIAT PANDA (169) 1.2 Natural Power (169.AXB1A),
FIAT PANDA (169) 1.3 D Multijet (169AXG1A, 169AXD1A),
FIAT PANDA (169) 1.2 LPG (169.AXB1A)
…
View more
The steps may slightly vary depending on the car design.
How to change wipers blades FIAT PANDA 2 (169) [TUTORIAL AUTODOC]
All the parts you need to replace – Wiper Blades for PANDA (169) and other FIAT models
Replacement: windshield wipers – Fiat Panda 169. AUTODOC experts recommend:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
Please note: all work on the car – Fiat Panda 169 – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip. Use a flat screwdriver.
Step 4
Remove the blade from the wiper arm.
Replacement: windshield wipers – Fiat Panda 169. Professionals recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – Fiat Panda 169. AUTODOC recommends:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Panda II Hatchback (169) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FIAT PANDA (169)
View more
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Initial Car Inspection: What to Check Before You Buy | AUTODOC tips
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
How to easily repair a punctured tyre | AUTODOC tips