How to carry out replacement: Control Arm 1.4 PEUGEOT Partner Origin Combispace (G_)
Disclaimer
Change PEUGEOT Partner Origin Combispace (G_) 1.4 Control Arm yourself – manuals and video tutorials

How to change front lower arm on PEUGEOT Partner Origin Combispace (G_) – replacement guide

downloads: 1
Views: 10
Download your free tutorial and fix PEUGEOT Partner Origin Combispace (G_) 1.6 16V problems yourself Download for free 1.94 MB Control Arm for PEUGEOT Partner Origin Combispace (G_) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT Partner Origin Combispace (G_) 1.6 16V, PEUGEOT Partner Origin Combispace (G_) 1.4, PEUGEOT Partner Origin Combispace (G_) 1.9 D, PEUGEOT Partner Origin Combispace (G_) 1.6 HDi, PEUGEOT Partner Origin Combispace (G_) 1.6 HDi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for Partner Origin Combispace (G_) and other PEUGEOT models
Alternative products
How to change Suspension arm on PEUGEOT Partner Origin Combispace (G_) 1.4 – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: front lower arm – PEUGEOT Partner Origin Combispace (G_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #13
Combination spanner #17
Drive socket # 13
Drive socket # 16
Drive socket # 17
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Tap wrench
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: front lower arm – PEUGEOT Partner Origin Combispace (G_). Professionals recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – PEUGEOT Partner Origin Combispace (G_). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on PEUGEOT Partner Origin Combispace (G_) 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT Partner Origin Combispace (G_) 1.4 2009 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    PEUGEOT Partner Origin Combispace (G_) 1.6 HDi 2010 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT Partner Origin Combispace (G_)
  4. Step 5
    Changing Control Arm on PEUGEOT Partner Origin Combispace (G_) 1.6 16V 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT PARTNER 1.4 2012 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
    Replacement: front lower arm – PEUGEOT Partner Origin Combispace (G_). AUTODOC recommends:
    After applying the spray, wait a few minutes.Wear protective goggles.
  6. Step 7
    How to replace Control Arm on PEUGEOT Partner Origin Combispace (G_) 2013: download PDF manuals and video instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a drive socket #17. Use a combination spanner #17.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on PEUGEOT Partner Origin Combispace (G_) 1.9 D 2008 - download illustrated guide
    Remove the fastening bolt.
  8. Step 9
    Need to know how to renew Control Arm on PEUGEOT PARTNER 2009? This free workshop manual will help you to do it yourself
    Disconnect the lower arm from the steering knuckle. Use a crowbar.
  9. Step 10
    Changing of Control Arm on PEUGEOT Partner Origin Combispace (G_) 2010 won't be an issue if you follow this illustrated step-by-step guide
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  10. Step 11
    PEUGEOT PARTNER 1.4 Control Arm replacement: online guides and video tutorials
    Unscrew the front arm fastener. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on PEUGEOT Partner Origin Combispace (G_) 2012 1.4 by yourself
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Partner Origin Combispace (G_) 1.4 2013 Control Arm DIY replacement workshop manual
    Unscrew the rear fastener connecting the control arm to the subframe. Use a drive socket #13. Use a drive socket #16. Use a tap wrench.
  13. Step 14
    How to change Control Arm on PEUGEOT Partner Origin Combispace (G_) 2008 - tips and tricks
    Remove the rear fastener of the control arm.
  14. Step 15
    Step-by-step recommendations for DIY replacement PEUGEOT Partner Origin Combispace (G_) 2009 1.4 Control Arm
    Remove the front fastener of the control arm.
  15. Step 16
    DIY replacement of Control Arm on PEUGEOT Partner Origin Combispace (G_) 1.9 D 2010 is not an issue anymore with our step-by-step tutorial
    Remove the arm. Use a crowbar.
  16. Step 17
    How to change Control Arm on PEUGEOT Partner Origin Combispace (G_) 2008 - free PDF and video manuals
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  17. Step 18
    How to replace PEUGEOT Partner Origin Combispace (G_) 1.4 2009 Control Arm - step-by-step manuals and video guides
    Install a new arm. Use a crowbar.
    Replacement: front lower arm – PEUGEOT Partner Origin Combispace (G_). Tip from AUTODOC:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  18. Step 19
    PEUGEOT Partner Origin Combispace (G_) 1.6 HDi 2010 Control Arm replacement: free workshop manuals
    Install the rear fastener of the arm.
  19. Step 20
    Changing Control Arm on PEUGEOT Partner Origin Combispace (G_) 1.6 16V 2011 by yourself
    Install the front fastener of the arm.
  20. Step 21
    How to remove PEUGEOT PARTNER 1.4 2012 Control Arm - online easy-to-follow instructions
    Screw the rear arm fastener. Use a combination spanner #13. Use a drive socket #16. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT Partner Origin Combispace (G_) model

PEUGEOT Partner Origin Combispace (G_) tyre size

Popular maintenance tutorials for PEUGEOT Partner Origin Combispace (G_)

More manuals for PEUGEOT Partner Origin Combispace (G_)

Complete guides for changing the Control arm on different PEUGEOT PARTNER models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT Partner Origin Combispace (G_) Control Arm replacement - online guide
Tips & tricks for your PEUGEOT Partner Origin Combispace (G_)
View more
  • How to change Control arm on PEUGEOT Partner Origin Combispace (G_) 1.9 D - replacement tricks
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
    9K views
    Published on: 08/12/2020
  • Changing Wishbone PEUGEOT Partner Origin Combispace (G_) 1.4 - Replacement Tips
    Save Money on Fuel with These Easy Tips | AUTODOC
    5K views
    Published on: 27/09/2022
  • Maintenance Hacks - PEUGEOT Partner Origin Combispace (G_) 1.6 HDi Control arms replacement guide
    Don’t Replace, Restore: Fixing Damaged Threads at Home
    8K views
    Published on: 04/05/2023
  • Replace Trailing arm on PEUGEOT Partner Origin Combispace (G_) - free video tips
    3 essential tips for choosing summer tyres | Get ready for warmer weather
    4K views
    Published on: 18/05/2023

Most commonly replaced car parts on PEUGEOT PARTNER

Professional manuals for the most common PEUGEOT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT Partner Origin Combispace (G_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME