How to carry out replacement: Control Arm 1.4 HDi Peugeot 208 Mk1
Disclaimer
Change Peugeot 208 Mk1 1.6 Control Arm yourself – manuals and video tutorials

How to change front lower arm on Peugeot 208 1 – replacement guide

downloads: 37
Views: 629
Download your free tutorial and fix PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 GTi problems yourself Download for free 2.84 MB Control Arm for Peugeot 208 Mk1 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 208 I Hatchback (CA_, CC_) 1.6, PEUGEOT 208 I Hatchback (CA_, CC_) 1.4 HDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 HDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 HDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6, PEUGEOT 208 I Hatchback (CA_, CC_) 1.0, PEUGEOT 208 I Hatchback (CA_, CC_) 1.4 VTi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 GTi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.2 THP, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 HDi / BlueHDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 GTi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 BlueHDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 BlueHDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 THP, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 HDi, PEUGEOT 208 I Hatchback (CA_, CC_) 1.4 GPL, PEUGEOT 208 I Hatchback (CA_, CC_) 1.2 GPL, PEUGEOT 208 I Hatchback (CA_, CC_) 1.2 Flex, PEUGEOT 208 I Hatchback (CA_, CC_) 1.2 VTi / PureTech, PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 e-HDi … View more

The steps may slightly vary depending on the car design.

How to change front suspension arm PEUGEOT 208 1 (CA_,CC_)

video
Published on: 23/07/2019
35K views
All the parts you need to replace – Control Arm for 208 I Hatchback (CA_, CC_) and other PEUGEOT models
Alternative products
How to change Suspension arm on Peugeot 208 Mk1 1.4 HDi – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: front lower arm – Peugeot 208 1. List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Torx bit T55
Drive socket # E8
Drive socket # 16
Drive socket # 18
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: front lower arm – Peugeot 208 1. Tip:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – Peugeot 208 1. Use the following procedure:
  1. Step 1
    How to change Control Arm on Peugeot 208 Mk1 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 208 I Hatchback (CA_, CC_) 1.4 HDi 2013 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Peugeot 208 Mk1 1.2 VTI 2014 Control Arm replacement: free workshop manuals
    Loosen the fastener of the driveshaft. Use a drive socket #32. Use a tap wrench.
  4. Step 4
    Changing Control Arm on PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 BlueHDi 2015 by yourself
    Raise the front of the car and secure on supports.
  5. Step 5
    How to remove PEUGEOT 208 1.0 2016 Control Arm - online easy-to-follow instructions
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Peugeot 208 1
  6. Step 6
    How to replace Control Arm on PEUGEOT 208 I Hatchback (CA_, CC_) 2017: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 7
    How hard is it to do yourself: Control Arm replacement on Peugeot 208 Mk1 1.4 VTi 2018 - download illustrated guide
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  8. Step 8
    Need to know how to renew Control Arm on PEUGEOT 208 2019? This free workshop manual will help you to do it yourself
    Unscrew the ball joint fastening to the steering knuckle. Use a drive socket #E8. Use a drive socket #18. Use a ratchet wrench.
  9. Step 9
    Changing of Control Arm on Peugeot 208 Mk1 2020 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolt.
  10. Step 10
    PEUGEOT 208 1.6 Control Arm replacement: online guides and video tutorials
    Loosen the rear fastener of the control arm. Use a drive socket #18. Use a tap wrench.
  11. Step 11
    Replacing Control Arm on Peugeot 208 Mk1 2013 1.4 HDi by yourself
    Loosen the front fastener of the control arm. Use a drive socket #18. Use a tap wrench.
  12. Step 12
    208 I Hatchback (CA_, CC_) 1.0 2014 Control Arm DIY replacement workshop manual
    Unscrew the rear arm fastener. Use Torx T55. Use a drive socket #18. Use a ratchet wrench.
  13. Step 13
    How to change Control Arm on PEUGEOT 208 I Hatchback (CA_, CC_) 2015 - tips and tricks
    Remove the fastening bolt.
  14. Step 14
    Step-by-step recommendations for DIY replacement Peugeot 208 Mk1 2016 1.0 Control Arm
    Disconnect the ball joint from the steering knuckle. Use a crowbar.
  15. Step 15
    DIY replacement of Control Arm on PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 HDi 2017 is not an issue anymore with our step-by-step tutorial
    Unscrew the fastener connecting the drive shaft to the wheel hub.
  16. Step 16
    How to change Control Arm on Peugeot 208 Mk1 2012 - free PDF and video manuals
    Detach the driveshaft from the steering knuckle.
  17. Step 17
    How to replace PEUGEOT 208 I Hatchback (CA_, CC_) 1.4 HDi 2013 Control Arm - step-by-step manuals and video guides
    Unscrew the front arm fastener. Use Torx T55. Use a drive socket #18. Use a ratchet wrench.
  18. Step 18
    Peugeot 208 Mk1 1.2 VTI 2014 Control Arm replacement: free workshop manuals
    Remove the fastening bolt.
  19. Step 19
    Changing Control Arm on PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 BlueHDi 2015 by yourself
    Remove the arm. Use a crowbar.
  20. Step 20
    How to remove PEUGEOT 208 1.0 2016 Control Arm - online easy-to-follow instructions
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  21. Step 21
    How to replace Control Arm on PEUGEOT 208 I Hatchback (CA_, CC_) 2017: download PDF manuals and video instructions
    Install a new arm.
    Replacement: front lower arm – Peugeot 208 1. AUTODOC recommends:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  22. Step 22
    How hard is it to do yourself: Control Arm replacement on Peugeot 208 Mk1 1.4 VTi 2018 - download illustrated guide
    Install the control arm fasteners.
  23. Step 23
    Need to know how to renew Control Arm on PEUGEOT 208 2019? This free workshop manual will help you to do it yourself
    Clean the splines of the drive shaft CV joint. Use WD-40 spray.
  24. Step 24
    Changing of Control Arm on Peugeot 208 Mk1 2020 won't be an issue if you follow this illustrated step-by-step guide
    Mount the drive shaft into the wheel hub.
  25. Step 25
    PEUGEOT 208 1.6 Control Arm replacement: online guides and video tutorials
    Connect the ball joint to the steering knuckle. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 208 I Hatchback (CA_, CC_) model

Peugeot 208 Mk1 tyre size

Popular maintenance tutorials for Peugeot 208 Mk1

More manuals for Peugeot 208 Mk1

Complete guides for changing the Control arm on different PEUGEOT 208 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 208 I Hatchback (CA_, CC_) Control Arm replacement - online guide
Tips & tricks for your PEUGEOT 208 I Hatchback (CA_, CC_)
View more
  • How to change Control arm on PEUGEOT 208 I Hatchback (CA_, CC_) 1.6 HDi - replacement tricks
    How to fix your car with AUTODOC CLUB
    17K views
    Published on: 30/11/2021
  • Changing Wishbone Peugeot 208 Mk1 1.4 HDi - Replacement Tips
    When, why, and how to change engine oil | AUTODOC tips
    7K views
    Published on: 16/08/2024
  • Maintenance Hacks - PEUGEOT 208 I Hatchback (CA_, CC_) 1.2 VTI Control arms replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
    14K views
    Published on: 15/06/2023
  • Replace Trailing arm on Peugeot 208 Mk1 - free video tips
    How to repair a bumper yourself | AUTODOC tips
    19K views
    Published on: 01/06/2023

Most commonly replaced car parts on PEUGEOT 208

Professional manuals for the most common PEUGEOT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 208 I Hatchback (CA_, CC_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME