Important!
This replacement procedure can be used for:
PEUGEOT 2008 Estate (CU_) 1.2 VTi, PEUGEOT 2008 Estate (CU_) 1.6 VTi, PEUGEOT 2008 Estate (CU_) 1.6 HDi, PEUGEOT 2008 Estate (CU_) 1.6 HDi, PEUGEOT 2008 Estate (CU_) 1.4 HDi, PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 120, PEUGEOT 2008 Estate (CU_) 1.2 THP 110 / PureTech 110, PEUGEOT 2008 Estate (CU_) 1.2 THP 130 / PureTech 130, PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 100, PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 75, PEUGEOT 2008 Estate (CU_) 1.6 Griffe Flex, PEUGEOT 2008 Estate (CU_) 1.6 Flex, PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi, PEUGEOT 2008 Estate (CU_) 1.6 VTi, PEUGEOT 2008 Estate (CU_) 1.6 THP 165, PEUGEOT 2008 Estate (CU_) 1.6 VTi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for 2008 Estate (CU_) and other PEUGEOT models
How to change Suspension arm on Peugeot 2008 Estate 1.6 HDi – step-by-step instructions for straightforward car repair
Suspension arm
How to change Link Set, wheel suspension on Peugeot 2008 Estate 1.6 HDi – step-by-step instructions for straightforward car repair
Link Set, wheel suspension
Tools
Replacement: front lower arm – PEUGEOT 2008. List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Torx bit T55
Drive socket # E8
Drive socket # 16
Drive socket # 18
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – PEUGEOT 2008. Tip:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – PEUGEOT 2008. Use the following procedure:
  1. Step 1
    How to change Control Arm on Peugeot 2008 Estate 2013 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 2008 Estate (CU_) 1.6 HDi 2014 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Peugeot 2008 Estate 1.6 BlueHDi 100 2015 Control Arm replacement: free workshop manuals
    Loosen the fastener of the driveshaft. Use a drive socket #32. Use a tap wrench.
  4. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    Changing Control Arm on PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 120 2016 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT 2008
  5. Step 6
    How to remove PEUGEOT 2008 1.2 THP 110 / PureTech 110 2017 Control Arm - online easy-to-follow instructions
    Remove the wheel.
  6. Step 7
    How to replace Control Arm on PEUGEOT 2008 Estate (CU_) 2018: download PDF manuals and video instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Peugeot 2008 Estate 1.4 HDi 2019 - download illustrated guide
    Unscrew the ball joint fastening to the steering knuckle. Use a drive socket #E8. Use a drive socket #18. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on PEUGEOT 2008 2020? This free workshop manual will help you to do it yourself
    Remove the fastening bolt.
  9. Step 10
    Changing of Control Arm on Peugeot 2008 Estate 2021 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the rear fastener of the control arm. Use a drive socket #18. Use a tap wrench.
  10. Step 11
    PEUGEOT 2008 1.6 BlueHDi 75 Control Arm replacement: online guides and video tutorials
    Loosen the front fastener of the control arm. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on Peugeot 2008 Estate 2023 1.6 HDi by yourself
    Unscrew the rear arm fastener. Use Torx T55. Use a drive socket #18. Use a ratchet wrench.
  12. Step 13
    2008 Estate (CU_) 1.2 THP 110 / PureTech 110 2024 Control Arm DIY replacement workshop manual
    Remove the fastening bolt.
  13. Step 14
    How to change Control Arm on PEUGEOT 2008 Estate (CU_) 2013 - tips and tricks
    Disconnect the ball joint from the steering knuckle. Use a crowbar.
  14. Step 15
    Step-by-step recommendations for DIY replacement Peugeot 2008 Estate 2014 1.2 THP 110 / PureTech 110 Control Arm
    Unscrew the fastener connecting the drive shaft to the wheel hub.
  15. Step 16
    DIY replacement of Control Arm on PEUGEOT 2008 Estate (CU_) 1.2 VTi 2015 is not an issue anymore with our step-by-step tutorial
    Detach the driveshaft from the steering knuckle.
  16. Step 17
    How to change Control Arm on Peugeot 2008 Estate 2013 - free PDF and video manuals
    Unscrew the front arm fastener. Use Torx T55. Use a drive socket #18. Use a ratchet wrench.
  17. Step 18
    How to replace PEUGEOT 2008 Estate (CU_) 1.6 HDi 2014 Control Arm - step-by-step manuals and video guides
    Remove the fastening bolt.
  18. Step 19
    Peugeot 2008 Estate 1.6 BlueHDi 100 2015 Control Arm replacement: free workshop manuals
    Remove the arm. Use a crowbar.
  19. Step 20
    Changing Control Arm on PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 120 2016 by yourself
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  20. Step 21
    How to remove PEUGEOT 2008 1.2 THP 110 / PureTech 110 2017 Control Arm - online easy-to-follow instructions
    Install a new arm.
    Replacement: front lower arm – PEUGEOT 2008. AUTODOC recommends:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  21. Step 22
    How to replace Control Arm on PEUGEOT 2008 Estate (CU_) 2018: download PDF manuals and video instructions
    Install the control arm fasteners.
  22. Step 23
    How hard is it to do yourself: Control Arm replacement on Peugeot 2008 Estate 1.4 HDi 2019 - download illustrated guide
    Clean the splines of the drive shaft CV joint. Use WD-40 spray.
  23. Step 24
    Need to know how to renew Control Arm on PEUGEOT 2008 2020? This free workshop manual will help you to do it yourself
    Mount the drive shaft into the wheel hub.
  24. Step 25
    Changing of Control Arm on Peugeot 2008 Estate 2021 won't be an issue if you follow this illustrated step-by-step guide
    Connect the ball joint to the steering knuckle. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 2008 Estate (CU_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 2008 Estate (CU_) Control Arm replacement - online guide
Tips & tricks for your PEUGEOT 2008 Estate (CU_)
View more
  • How to change Control arm on PEUGEOT 2008 Estate (CU_) 1.2 VTi - replacement tricks
    How to check your head gasket | AUTODOC
  • Changing Wishbone Peugeot 2008 Estate 1.6 HDi - Replacement Tips
    TOP 8 mistakes car owners make | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 100 Control arms replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Replace Trailing arm on Peugeot 2008 Estate - free video tips
    What to do if your check engine light is on | AUTODOC tips