Important!

This replacement procedure can be used for:
TOYOTA Mirai (JPD10) FCV (JPD10_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Mirai (JPD10) and other TOYOTA models

Anti-roll bar link

Anti-roll bar link for Mirai (JPD10) Hydrogen (154 hp)

Replacement: anti roll bar links – TOYOTA MIRAI (JPD1_). Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Drive socket # 17 
                      
                        Wheel impact socket #21
                      
                        Torque wrench
                      
                        Tap wrench
                      
                        Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on TOYOTA MIRAI (JPD1_) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – TOYOTA MIRAI (JPD1_). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #21.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA MIRAI (JPD1_)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a tap wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a tap wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – TOYOTA MIRAI (JPD1_). AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10

Install a new rod, tighten the fasteners.
Step 11

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 74 Nm torque.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 74 Nm torque.
Step 13

Treat all joints of the stabiliser link. Use copper grease.
Step 14

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 15

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. TOYOTA MIRAI (JPD1_)
Step 16

Screw in the wheel bolts. Use wheel impact socket #21.
Step 17

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #21. Use a torque wrench. Tighten it to 103 nm torque.

Step 18

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Mirai (JPD10) model.

Browse tyres

How to change front lower arm on TOYOTA Mirai (JPD10) – replacement guide

Free download PDF
2.56 MB
How to change rear wheel bearing on TOYOTA Mirai (JPD10) – replacement guide

Free download PDF
2.92 MB
How to change pollen filter on TOYOTA Mirai (JPD10) – replacement guide

Free download PDF
665.6 KB
How to change engine oil and filter on Toyota Aygo AB1 – replacement guide

Free download PDF
2.32 MB
How to change rear brake shoes on Toyota Yaris P1 – replacement guide

Free download PDF
2.32 MB
How to change serpentine belt on Toyota Aygo AB1 – replacement guide

Free download PDF
2.36 MB

How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Toyota Yaris P1 – replacement guide

Free download PDF
1.61 MB
How to change front anti roll bar links on Toyota Aygo AB1 – replacement guide

Free download PDF
2.05 MB
How to change rear anti roll bar links on Toyota Prado J120 – replacement guide

Free download PDF
1.68 MB
How to change front anti roll bar links on Toyota Prado J120 – replacement guide

Free download PDF
1.73 MB
How to change rear anti roll bar links on Toyota RAV4 II – replacement guide

Free download PDF
1.32 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.