Important!
This replacement procedure can be used for:
TOYOTA Alphard (_H1_) 2.4 Hybrid 4WD (ATH10W), TOYOTA Alphard (_H1_) 3.0 (MNH10), TOYOTA Alphard (_H1_) 2.4 (ANH10W) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Alphard (_H1_) and other TOYOTA models
How to change Anti-roll bar link on Alphard AH10 2.4 (ANH10W) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – TOYOTA ALPHARD (ATH1_, MNH1_, ANH1_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
HEX bit no.H6
Wheel impact socket #21
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on TOYOTA ALPHARD (ATH1_, MNH1_, ANH1_) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA ALPHARD (ATH1_, MNH1_, ANH1_). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Alphard AH10 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace TOYOTA Alphard (_H1_) 2.4 (ANH10W) 2004 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Alphard AH10 3.0 (MNH10) 2005 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – TOYOTA ALPHARD (ATH1_, MNH1_, ANH1_). Tip from AUTODOC experts:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on TOYOTA Alphard (_H1_) 2.4 4WD (ANH15W) 2006 by yourself
    Remove the wheel.
  5. Step 6
    How to remove TOYOTA ALPHARD 3.0 4WD (MNH15W) 2007 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on TOYOTA Alphard (_H1_) 2008: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H6. Use a combination spanner #17.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Alphard AH10 2.4 Hybrid 2003 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on TOYOTA ALPHARD 2004? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod. Use a crowbar.
    Replacement: anti roll bar links – TOYOTA ALPHARD (ATH1_, MNH1_, ANH1_). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Anti Roll Bar Links on Alphard AH10 2005 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners. Use a combination spanner #19. Use a drive socket #19. Use HEX No.H6. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Alphard I (AH10) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
TOYOTA Alphard (_H1_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY TOYOTA Alphard (_H1_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your TOYOTA Alphard (_H1_)
View more
  • How to change Drop links on TOYOTA Alphard (_H1_) 2.4 Hybrid 4WD (ATH10W) - replacement tricks
    How to shine your tyres | AUTODOC tips
  • Changing Stabilizer link Alphard AH10 2.4 (ANH10W) - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - TOYOTA Alphard (_H1_) 3.0 (MNH10) Sway bar link replacement guide
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Replace Drop link on Alphard AH10 - free video tips
    What to do if the airbag light is on | AUTODOC tips