
Disclaimer
How to change front anti roll bar links on TOYOTA Alphard / Vellfire (_H2_) – replacement guide
downloads:
9
Views:
134
Important!
This replacement procedure can be used for:
TOYOTA Alphard / Vellfire (_H2_) 3.5 (GGH20W), TOYOTA Alphard / Vellfire (_H2_) 3.5 (GGH20W, GGH20), TOYOTA Alphard / Vellfire (_H2_) 3.5 4WD (GGH25W), TOYOTA Alphard / Vellfire (_H2_) 2.4 (ANH20W, ANH20), TOYOTA Alphard / Vellfire (_H2_) 2.4 4WD (ANH25W), TOYOTA Alphard / Vellfire (_H2_) 2.4 Hybrid (ATH20), TOYOTA Alphard / Vellfire (_H2_) 2.4 (ANH20W) … View more
The steps may slightly vary depending on the car design.
TOYOTA Alphard / Vellfire (_H2_) 3.5 (GGH20W), TOYOTA Alphard / Vellfire (_H2_) 3.5 (GGH20W, GGH20), TOYOTA Alphard / Vellfire (_H2_) 3.5 4WD (GGH25W), TOYOTA Alphard / Vellfire (_H2_) 2.4 (ANH20W, ANH20), TOYOTA Alphard / Vellfire (_H2_) 2.4 4WD (ANH25W), TOYOTA Alphard / Vellfire (_H2_) 2.4 Hybrid (ATH20), TOYOTA Alphard / Vellfire (_H2_) 2.4 (ANH20W) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Alphard / Vellfire (_H2_) and other TOYOTA models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Wheel impact socket #21
Torque wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA ALPHARD / VELLFIRE (GGH2_, ANH2_, ATH2_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA ALPHARD / VELLFIRE (GGH2_, ANH2_, ATH2_). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #21.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA ALPHARD / VELLFIRE (GGH2_, ANH2_, ATH2_)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a tap wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a tap wrench.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA ALPHARD / VELLFIRE (GGH2_, ANH2_, ATH2_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed.
- Step 10Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Alphard / Vellfire II (AH20) model
Popular maintenance tutorials for Alphard AH20
Complete guides for changing the Drop links on different TOYOTA ALPHARD models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Alphard / Vellfire (_H2_)
View more
- How to inspect and troubleshoot your car heater when it’s not working
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
- How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Most commonly replaced car parts on TOYOTA ALPHARD
Time to replace parts? Get even better deals in our Shop app.

SCAN ME