Important!
This replacement procedure can be used for:
RENAULT MEGANE II Saloon (LM0/1_) 1.6 Hi-Flex (LM2E, LM2M, LM24), RENAULT MEGANE II Saloon (LM0/1_) 1.4, RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 2.0, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM0F, LM0T, LM2B), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi (LM0G, LM1G, LM2C), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM02, LM13, LM2A), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1F), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1E), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi (LM14, LM1D), RENAULT MEGANE II Saloon (LM0/1_) 1.6 16V (LM1R, LM0C), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM16), RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 2.0, RENAULT MEGANE II Saloon (LM0/1_) 1.6 View more

The steps may slightly vary depending on the car design.

How to change rear wheel bearing / rear hub bearing on RENAULT MEGANE 2 (LM) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Wheel Bearing for MEGANE II Saloon (LM0/1_) and other RENAULT models
How to change Wheel bearing kit on RENAULT MEGANE II Saloon (LM0/1_) 1.6 – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on RENAULT MEGANE II Saloon (LM0/1_) 1.6 – step-by-step instructions for straightforward car repair
Wheel bearing
How to change Cap, wheel bearing on RENAULT MEGANE II Saloon (LM0/1_) 1.6 – step-by-step instructions for straightforward car repair
Cap, wheel bearing
Tools
Replacement: wheel bearing – Renault Megane 2. Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Multipurpose grease
Copper grease
Combination spanner №15
Drive socket # 13
Drive socket # E16
Drive socket # 30
Wheel impact socket #19
Ratchet wrench
Torque wrench
Brake caliper wind back tool
Tap wrench
Hammer
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – Renault Megane 2. AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your Renault Megane 2 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – Renault Megane 2. Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 2003 - free PDF and video manuals
    Open the bonnet. Unscrew the brake fluid reservoir cap.
  2. Step 2
    How to replace RENAULT MEGANE II Saloon (LM0/1_) 1.6 2004 Wheel Bearing - step-by-step manuals and video guides
    Secure the wheels with chocks.
  3. Step 3
    RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi 2005 Wheel Bearing replacement: free workshop manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  4. Step 4
    Changing Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM02, LM13, LM2A) 2006 by yourself
    Raise the rear of the car and secure on supports.
  5. Step 5
    How to remove RENAULT MEGANE 1.4 2007 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Renault Megane 2
  6. Step 6
    How to replace Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 2008: download PDF manuals and video instructions
    Remove the wheel.
  7. Step 7
    How hard is it to do yourself: Wheel Bearing replacement on RENAULT MEGANE II Saloon (LM0/1_) 1.6 16V (LM1R, LM0C) 2009 - download illustrated guide
    Spread the brake pads. Use a crowbar.
  8. Step 8
    Need to know how to renew Wheel Bearing on RENAULT MEGANE 2010? This free workshop manual will help you to do it yourself
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 9
    Changing of Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 2011 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake caliper fastening. Use a combination spanner #15. Use a drive socket #13. Use a ratchet wrench.
  10. Step 10
    RENAULT MEGANE 2.0 Wheel Bearing replacement: online guides and video tutorials
    Remove the brake caliper.
    Replacement: wheel bearing – Renault Megane 2. AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  11. Step 11
    Replacing Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 2013 1.6 by yourself
    Remove the brake pads. Use a crowbar.
  12. Step 12
    MEGANE II Saloon (LM0/1_) 1.4 2014 Wheel Bearing DIY replacement workshop manual
    Clean the brake caliper bracket fasteners. Use WD-40 spray.
  13. Step 13
    How to change Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 2015 - tips and tricks
    Unscrew the caliper bracket fastening. Use a drive socket #E16. Use a tap wrench.
  14. Step 14
    Step-by-step recommendations for DIY replacement RENAULT MEGANE II Saloon (LM0/1_) 2016 1.4 Wheel Bearing
    Remove the caliper bracket.
  15. Step 15
    DIY replacement of Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1E) 2017 is not an issue anymore with our step-by-step tutorial
    Pry up and remove the wheel hub cap. Use a crowbar. Use a hammer.
  16. Step 16
    How to change Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 2003 - free PDF and video manuals
    Unscrew the hub lock nut. Use a drive socket #30. Use a tap wrench.
  17. Step 17
    How to replace RENAULT MEGANE II Saloon (LM0/1_) 1.6 2004 Wheel Bearing - step-by-step manuals and video guides
    Remove the brake disc assemled with the wheel hub bearing.
  18. Step 18
    RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi 2005 Wheel Bearing replacement: free workshop manuals
    Install the brake disc assembled with the wheel hub bearing.
  19. Step 19
    Changing Wheel Bearing on RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM02, LM13, LM2A) 2006 by yourself
    Screw the wheel hub lock nut. Use a drive socket #30. Use a torque wrench. Tighten it to 175 Nm torque.
  20. Step 20
    How to remove RENAULT MEGANE 1.4 2007 Wheel Bearing - online easy-to-follow instructions
    Treat the hub where it contacts the brake disk. Use a multipurpose grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT MEGANE II Saloon (LM0/1_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT MEGANE II Saloon (LM0/1_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT MEGANE II Saloon (LM0/1_)
View more
  • How to change Wheel bearings on RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1E) - replacement tricks
    Coolant comparison test | AUTODOC
  • Changing Hub bearing RENAULT MEGANE II Saloon (LM0/1_) 1.6 - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi Wheel bearing kit replacement guide
    How to choose the right engine oil for your car | AUTODOC
  • Replace Wheel hub bearing on RENAULT MEGANE II Saloon (LM0/1_) - free video tips
    8 bad driving habits | AUTODOC tips