Disclaimer
How to change rear wheel bearing on RENAULT MEGANE I (BA0/1_) – replacement guide
downloads:
12
Views:
161
Important!
This replacement procedure can be used for:
RENAULT MEGANE I (BA0/1_) 1.4 e (BA0E, BA0V), RENAULT MEGANE I (BA0/1_) 1.6 e (BA0F, BA0S), RENAULT MEGANE I (BA0/1_) 2.0 i (BA0G), RENAULT MEGANE I (BA0/1_) 1.9 D Eco (BA0A, BA0U, BA0R), RENAULT MEGANE I (BA0/1_) 1.6 i (BA0L), RENAULT MEGANE I (BA0/1_) 1.9 dT (B/SA0K, B/SA0Y), RENAULT MEGANE I (BA0/1_) 1.4 Eco (BA0T), RENAULT MEGANE I (BA0/1_) 2.0 16V (BA0H), RENAULT MEGANE I (BA0/1_) 1.9 TDI, RENAULT MEGANE I (BA0/1_) 1.9 dTi (BA08, BA0N), RENAULT MEGANE I (BA0/1_) 1.6 16V (BA04, BA0B, BA11, BA1J, BA16, BA19, BA1K, BA1V,..., RENAULT MEGANE I (BA0/1_) 1.4 16V (BA0D, BA1H, BA0W, BA10), RENAULT MEGANE I (BA0/1_) 2.0 i, RENAULT MEGANE I (BA0/1_) 1.9 dCi (BA05, BA1F), RENAULT MEGANE I (BA0/1_) 1.9 dTi (BA1U), RENAULT MEGANE I (BA0/1_) 1.8 16V (BA06, BA12, BA1A, BA1M, BA1R), RENAULT MEGANE I (BA0/1_) 1.9 DTi, RENAULT MEGANE I (BA0/1_) 1.9 D, RENAULT MEGANE I (BA0/1_) 1.6 LPG, RENAULT MEGANE I (BA0/1_) 1.6 LPG, RENAULT MEGANE I (BA0/1_) 2.0 … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE I (BA0/1_) 1.4 e (BA0E, BA0V), RENAULT MEGANE I (BA0/1_) 1.6 e (BA0F, BA0S), RENAULT MEGANE I (BA0/1_) 2.0 i (BA0G), RENAULT MEGANE I (BA0/1_) 1.9 D Eco (BA0A, BA0U, BA0R), RENAULT MEGANE I (BA0/1_) 1.6 i (BA0L), RENAULT MEGANE I (BA0/1_) 1.9 dT (B/SA0K, B/SA0Y), RENAULT MEGANE I (BA0/1_) 1.4 Eco (BA0T), RENAULT MEGANE I (BA0/1_) 2.0 16V (BA0H), RENAULT MEGANE I (BA0/1_) 1.9 TDI, RENAULT MEGANE I (BA0/1_) 1.9 dTi (BA08, BA0N), RENAULT MEGANE I (BA0/1_) 1.6 16V (BA04, BA0B, BA11, BA1J, BA16, BA19, BA1K, BA1V,..., RENAULT MEGANE I (BA0/1_) 1.4 16V (BA0D, BA1H, BA0W, BA10), RENAULT MEGANE I (BA0/1_) 2.0 i, RENAULT MEGANE I (BA0/1_) 1.9 dCi (BA05, BA1F), RENAULT MEGANE I (BA0/1_) 1.9 dTi (BA1U), RENAULT MEGANE I (BA0/1_) 1.8 16V (BA06, BA12, BA1A, BA1M, BA1R), RENAULT MEGANE I (BA0/1_) 1.9 DTi, RENAULT MEGANE I (BA0/1_) 1.9 D, RENAULT MEGANE I (BA0/1_) 1.6 LPG, RENAULT MEGANE I (BA0/1_) 1.6 LPG, RENAULT MEGANE I (BA0/1_) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for MEGANE I (BA0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Circlip pliers
Bush and bearing driver set
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT MEGANE I (BA0/1_). Professionals recommend:
- Do not re-use the bearing assembly of your RENAULT MEGANE I (BA0/1_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT MEGANE I (BA0/1_). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE I (BA0/1_) - Step 5
Remove the wheel. - Step 6
Clean the brake drum. Use a wire brush. Use WD-40 spray. - Step 7
Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT MEGANE I (BA0/1_). AUTODOC recommends:Some cars are not equipped with wheel hub caps. - Step 8
Clean the wheel hub fastener. Use WD-40 spray. - Step 9
Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench. - Step 10
Remove the brake drum.Replacement: wheel bearing – RENAULT MEGANE I (BA0/1_). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary. - Step 11
Remove the wheel hub bearing retaining ring. Use circlip pliers. - Step 12
Press out the wheel hub bearing. Use a bush and bearing driver set. - Step 13
Clean the hub bearing mounting seat. Use WD-40 spray. - Step 14
Press a new bearing into the wheel hub. Use a bush and bearing driver set.AUTODOC recommends:Replacement: wheel bearing – RENAULT MEGANE I (BA0/1_). Do not use excessive force during installation. This may damage the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane I Hatchback (BA) model
Popular maintenance tutorials for Renault Megane 1
Complete guides for changing the Wheel bearings on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE I (BA0/1_)
View more
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
Engine Overheating? Replace Your Cooling Fan to Fix It
DIY alternator repair | AUTODOC tips
How to align the timing marks correctly on an EA888 engine
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























